| During the sawing process, the water flow has to be adjusted so that the water jet lands on the edge of the saw blade. The most favourable feed rate must be determined for each individual object. As a general rule, however, the following applies: the lower the speed, the less forces coming to bear on object and saw blade, i.e. the gentler the sawing process will be. After trimming, the first undefined slice can be removed from the saw blade. Now the desired section thickness can be selected, considering the thickness of the saw blade has to be added to the desired thickness of final section. For example: if the saw blade has a thickness of 280 microns and the final section should have a thickness of 120 microns a feed of 400 microns has to be selected on the knurled screw for the setting of the section thickness.
|
/C9750586C7F78C96C1256A230030B5D3/$FILE/SP1600_duv_pro_b_sh.jpg)
