Catalog Leica VT1000 S

Foot switch for VT1000 S

Gillette blades VT - platinum hardened edges
pack of 10x10

Vibratome Injector Blades come ten to an injector package and allow for the easy replacement of Vibratome cutting blades.

Sapphire knife vor VT1000 S / VT1200 / S

Knife angle: 22 degrees
Material blade: Synthetic Single Crystal Sapphire
Height blade: 12 mm/ 0.5 inches
Thickness edge: 0.9 mm/ 0.035 inches
Length: 40 mm/ 1.5 inches

Magnetic specimen disc - orientable,
with turning lever

Cyanoacrylate adhesive for mounting
specimens onto specimen discs, 10 g

Magnifier for VT1000, double enlargement

Fiber optical light guide for Leica CLS 100

Leica CLS 100 cold light source including power cord - USA
100-120 V/ 50 - 60 Hz

Leica CLS 100 cold light source including power cord
for Europe and Great Britain
230-240 V/ 50 - 60 Hz

Leica CLS 100 cold light source including power cord - Australia
240 V/ 50 - 60 Hz

Blade holder S for use with Injector blades
or double-edge razor blades and sapphire knife.

Knife holder S for sectioning high specimens
(up to 2 cm)

Knife holder L for sectioning high specimens
(up to 2 cm)

Knife holder L for standard low profile
blades and large specimen sectioning,
70 mm x 50 mm

Buffer tray S
Volume: approx. 140 ml

Buffer tray L

Buffer tray S, double walled for VT1000 S,
to be used with Julabo FL300 chiller.

volume: approx. 200 ml

consisting of:
1 buffer tray S, double walled
2 tube clamps
2 silicone hoses, 1.5 m long, 6 mm diameter,
with isolation
1 hose coupling, assy.

Buffer tray L, double walled for VT1000 S,
to be used with Julabo FL300 chiller.

volume: approx. 200 ml

consisting of:
1 buffer tray L, double walled
2 tube clamps
2 silicone hoses, 1.5 m long, 6 mm diameter, with isolation
1 hose coupling, assy.

Julabo - FL300 Recirculating Chiller - 230 V/50 Hz


Recirculating Chiller for environmentally friendly
cooling.
The FL series offers a new generation of chillers
for routine cooling applications within the laboratory
and industry. The working temperature range covers -20°C
to 40°C, the temperature stability of the
PID control is ±0.5°C. All units can easily be cleaned
and are provided with a splash water proof keypad
with LED temperature indication. On the front of the
units there is an RS232 interface as well as an
alarm shutdown.
The filling port is easily accessible placed on
the top under a lift-up cover. Another hinged tray
serves as a file for the operating manual or other
documents concerning the installation. The removible
venting grid allows an easy cleaning of the condenser,
the drain tap is easily acceable behind the grid.
All models include an easily visible level indication.
Another advantage is the venting slots are on the
front and rear and therefore the units can be placed
directly one beside the other (space saving).



Advantages

• Ergonomic design and easy operation
• Splash-proof keypad with integrated mains switch
• Large, bright LED display
• Reliable Microprocessor PID temperature control
• Filling level indicator
• Powerful immersion pumps, suitable for continuous operation
• Permissible temperature in return line 80°C
• Easy filling from the top with hinged protective lid
• Low liquid level protection with optical and audible alarm signal
• Integrated stainless steel bath tanks
• Removable venting grid for cleaning of the condenser
• Front drain
• No side vents
• RS232 interface for PC-connection
• IP class according to IEC 60529: 21

Technical Specifications:

Working temperature range -20 - 40 °C
Temperature control PID
Temperature stability ±0.5 °C
Display LED
Display resolution 0.1 °C
Integrated programmer not available
Heater capacity 0 W
Cooling capacity
Refrigerant R134a
Pump capacity Pressure: 0.35 bar
Flow rate: 15 l/min
Digital interfaces RS232
Filling volume 3 - 4.5 Liters
Dimensions (W x L x H) 25 x 50 x 60 cm
Weight 39 kg
Ambient temperature 5 - 40 °C
Classification according to DIN 12876-1 -



Miscellaneous

Included: 2 each barbed fittings for tubing
8 and 12 mm inner dia. (pump connections M16x1 male)
Suitable fluids: water, water-glycol mixture,
JULABO Thermal bath fluids

Julabo - FL300 Recirculating Chiller - 115 V/60 Hz


Recirculating Chiller for environmentally friendly
cooling.
The FL series offers a new generation of chillers
for routine cooling applications within the laboratory
and industry. The working temperature range covers -20°C
to 40°C, the temperature stability of the
PID control is ±0.5°C. All units can easily be cleaned
and are provided with a splash water proof keypad
with LED temperature indication. On the front of the
units there is an RS232 interface as well as an
alarm shutdown.
The filling port is easily accessible placed on
the top under a lift-up cover. Another hinged tray
serves as a file for the operating manual or other
documents concerning the installation. The removible
venting grid allows an easy cleaning of the condenser,
the drain tap is easily acceable behind the grid.
All models include an easily visible level indication.
Another advantage is the venting slots are on the
front and rear and therefore the units can be placed
directly one beside the other (space saving).



Advantages

• Ergonomic design and easy operation
• Splash-proof keypad with integrated mains switch
• Large, bright LED display
• Reliable Microprocessor PID temperature control
• Filling level indicator
• Powerful immersion pumps, suitable for continuous operation
• Permissible temperature in return line 80°C
• Easy filling from the top with hinged protective lid
• Low liquid level protection with optical and audible alarm signal
• Integrated stainless steel bath tanks
• Removable venting grid for cleaning of the condenser
• Front drain
• No side vents
• RS232 interface for PC-connection
• IP class according to IEC 60529: 21

Technical Specifications:

Working temperature range -20 - 40 °C
Temperature control PID
Temperature stability ±0.5 °C
Display LED
Display resolution 0.1 °C
Integrated programmer not available
Heater capacity 0 W
Cooling capacity
Refrigerant R134a
Pump capacity Pressure: 0.35 bar
Flow rate: 15 l/min
Digital interfaces RS232
Filling volume 3 - 4.5 Liters
Dimensions (W x L x H) 25 x 50 x 60 cm
Weight 39 kg
Ambient temperature 5 - 40 °C
Classification according to DIN 12876-1 -



Miscellaneous

Included: 2 each barbed fittings for tubing
8 and 12 mm inner dia. (pump connections M16x1 male)
Suitable fluids: water, water-glycol mixture,
JULABO Thermal bath fluids

Julabo - FL300 Recirculating Chiller - 230 V/60 Hz


Recirculating Chiller for environmentally friendly
cooling.
The FL series offers a new generation of chillers
for routine cooling applications within the laboratory
and industry. The working temperature range covers -20°C
to 40°C, the temperature stability of the
PID control is ±0.5°C. All units can easily be cleaned
and are provided with a splash water proof keypad
with LED temperature indication. On the front of the
units there is an RS232 interface as well as an
alarm shutdown.
The filling port is easily accessible placed on
the top under a lift-up cover. Another hinged tray
serves as a file for the operating manual or other
documents concerning the installation. The removible
venting grid allows an easy cleaning of the condenser,
the drain tap is easily acceable behind the grid.
All models include an easily visible level indication.
Another advantage is the venting slots are on the
front and rear and therefore the units can be placed
directly one beside the other (space saving).



Advantages

• Ergonomic design and easy operation
• Splash-proof keypad with integrated mains switch
• Large, bright LED display
• Reliable Microprocessor PID temperature control
• Filling level indicator
• Powerful immersion pumps, suitable for continuous operation
• Permissible temperature in return line 80°C
• Easy filling from the top with hinged protective lid
• Low liquid level protection with optical and audible alarm signal
• Integrated stainless steel bath tanks
• Removable venting grid for cleaning of the condenser
• Front drain
• No side vents
• RS232 interface for PC-connection
• IP class according to IEC 60529: 21

Technical Specifications:

Working temperature range -20 - 40 °C
Temperature control PID
Temperature stability ±0.5 °C
Display LED
Display resolution 0.1 °C
Integrated programmer not available
Heater capacity 0 W
Cooling capacity
Refrigerant R134a
Pump capacity Pressure: 0.35 bar
Flow rate: 15 l/min
Digital interfaces RS232
Filling volume 3 - 4.5 Liters
Dimensions (W x L x H) 25 x 50 x 60 cm
Weight 39 kg
Ambient temperature 5 - 40 °C
Classification according to DIN 12876-1 -



Miscellaneous

Included: 2 each barbed fittings for tubing
8 and 12 mm inner dia. (pump connections M16x1 male)
Suitable fluids: water, water-glycol mixture,
JULABO Thermal bath fluids

Julabo - FL300 Recirculating Chiller - 100 V/50-60 Hz


Recirculating Chiller for environmentally friendly
cooling.
The FL series offers a new generation of chillers
for routine cooling applications within the laboratory
and industry. The working temperature range covers -20°C
to 40°C, the temperature stability of the
PID control is ±0.5°C. All units can easily be cleaned
and are provided with a splash water proof keypad
with LED temperature indication. On the front of the
units there is an RS232 interface as well as an
alarm shutdown.
The filling port is easily accessible placed on
the top under a lift-up cover. Another hinged tray
serves as a file for the operating manual or other
documents concerning the installation. The removible
venting grid allows an easy cleaning of the condenser,
the drain tap is easily acceable behind the grid.
All models include an easily visible level indication.
Another advantage is the venting slots are on the
front and rear and therefore the units can be placed
directly one beside the other (space saving).



Advantages

• Ergonomic design and easy operation
• Splash-proof keypad with integrated mains switch
• Large, bright LED display
• Reliable Microprocessor PID temperature control
• Filling level indicator
• Powerful immersion pumps, suitable for continuous operation
• Permissible temperature in return line 80°C
• Easy filling from the top with hinged protective lid
• Low liquid level protection with optical and audible alarm signal
• Integrated stainless steel bath tanks
• Removable venting grid for cleaning of the condenser
• Front drain
• No side vents
• RS232 interface for PC-connection
• IP class according to IEC 60529: 21

Technical Specifications:

Working temperature range -20 - 40 °C
Temperature control PID
Temperature stability ±0.5 °C
Display LED
Display resolution 0.1 °C
Integrated programmer not available
Heater capacity 0 W
Cooling capacity
Refrigerant R134a
Pump capacity Pressure: 0.35 bar
Flow rate: 15 l/min
Digital interfaces RS232
Filling volume 3 - 4.5 Liters
Dimensions (W x L x H) 25 x 50 x 60 cm
Weight 39 kg
Ambient temperature 5 - 40 °C
Classification according to DIN 12876-1 -



Miscellaneous

Included: 2 each barbed fittings for tubing
8 and 12 mm inner dia. (pump connections M16x1 male)
Suitable fluids: water, water-glycol mixture,
JULABO Thermal bath fluids

Cooling hose (pack of 2) - inlcluding hose couplings.
length: 1.50 m

Cooling hose is included in standard delivery
of VT1000 S and VT1200/s double-walled buffer trays.

Clamp to hold tube in buffer during oxygenation.
To be used with buffer trays (0481 42089,
0481 42084 and 0481 44837)

Antifrogen N - heat transfer liquid, 10 l
for use with Julabo FL300 Chiller

Note: must be diluted 50:50 with water before
use with Julabo FL300 Chiller

Specimen disc L, non-orienting, 70 mm x 50 mm

Specimen disc S, orienting, 50 mm

Specimen disc L, orienting, 70 mm x 50 mm