Catalog Leica EM FC7

EM CRION antistatic device with discharge mode and electrode, remote controlled for 100-240VAC, 50/60Hz Note: for remote control with a UC6 controller please order 16706044 additionally

EM CRION antistatic device with charge and discharge mode, electrode, two foot-switches, remote controlled for 100-240VAC, 50/60Hz (CEMOVIS / Tokuyasu application) Note: for remote control with a UC6 controller please order 16706044 additionally

Micromanipulator complete with forceps and two gridboxes for FC6 and FC7

for UC7 controller

for tubes inserted in collet holder of the cryo ultramicrotome.

Forceps for micromanipulator

Gridbox for micromanipulator

Knifeholder for FC6 and FC7 used for micromanipulator gridbox-holder (delivered without gridbox and gridbox- holder)

for transferring specimen to the carrier

with insulation coating

Cryo-manipulator with M4 thread.

with parallel jaws for flat specimens

Set of Cryotools to mount on rotating FC6 and FC7 knife holder. Cryotool base plate with flip-over grid loading position, section flatening position and transfer container position. Grid holding clamp for sliding and holding grids close to knife edge. Section press for contamination-free flattening of sections. Grid transfer container 2 pcs., for cryotransfer of grids with sections.

for Leica EM FC6

Cryo-Trim System (tungsten carbide)

Cryosphere for UC6 equipped with MZ6 (16705880 only), to reduce the humidity to less than 10%

for transferring specimen to the carrier

for suspension droplets, 50pcs

and concentric rings, 50pcs

with groove, 50 pcs

14,5V/90W (for CLS 100)

12V/100W (for CLS 100X)

for grid box and secondary cryogen removal.

- complete for 230V / 50Hz
- lamp housing CLS 100X with variable illumination intensity control
- mechanical diaphragm
- cooling fan
- low voltage bulb 100W
- twin gooseneck 4.5mm dia.
- two 350mm long flexible arms
- one 750mm long flexible light guide
- UC7 Mounting Adaptor

- complete for 115V / 60Hz
- lamp housing CLS 100X with variable illumination intensity control
- mechanical diaphragm
- cooling fan
- low voltage bulb 100W
- twin gooseneck 4.5mm dia.
- two 350mm long flexible arms
- one 750mm long flexible light guide
- UC7 Mounting Adaptor

14,5V/90W (for CLS 100)

12V/100W (for CLS 100X)

with parallel jaws for flat specimens

(includes 16702448 and 16702449)

(clamping range: 0-2mm)