Applications Leica EM TIC020
Cross Section of SiC paper
25 May 2010
Market: Paper industry, Metallographic industry
This Application Note describes the preparation method
"Cross Section of SiC paper"
using the Leica EM TIC020.
Silver heater in a heated window
17 May 2010
Cross section of a glass/silver wire interface
Market: Car industry
This Application Note describes the preparation method
"Silver heater in a heated window - Cross section of a glass/silver wire interface"
using the Leica EM TXP (for mechanical pre-preparation) and the Leica EM TIC020.
Goal:
- Cross section of a glass / silver wire interface
Process description (benchmark values for this particular sample):
Mechanical pre-preparation:
- Grinding with the EM TXP to get a flat cross-sectional surface
Parameter
Acceleration voltage: 7 kV
Gun current: 2.6mA
Milling time: 3
Complete process time: 3 h 10 min
Results:
- Perfect cross section of the glass / silver wire interface
- The structure of silver and the interface area with an intermediate layer are clearly visible.
- The silver wire shows a lot of pores and inclusions.
Cross section of Al for EBSD
12 November 2009
Market: Material Research Laboratories, Universities
This Application Note describes the preparation method
"Cross section of Al for EBSD"
using the Leica EM TIC020.
Cross Section of Glass Fibres Reinforced Polyamide
10 August 2009
Market: Polymer Industry, Research Institutes, Universities
This Application Note describes the preparation method
"Cross Section of Glass Fibres Reinforced Polyamide"
using the Leica EM TIC020.
Cross Section of Solar Cells
03 August 2009
Market: Solar Energy Companies, Material Research Institutes
This Application Note describes the preparation method
"Cross Section of Solar Cells"
using the Leica EM TIC020.