Catalog Leica EM VCT100

Specimen carriers DN 3.0 x 0.8mm (gold-plated copper) with flat sufrace. For high pressure freezing (HPM010 and HPM100), and freeze etching technique, 10pcs.

Specimen carriers DN 3.0x0.8mm (gold-plated copper) with dome-shaped indentation. Indentation: 1.4mm diameter, 0.3mm deep. For high pressure freezing (HPM010 and HPM100), and freeze etching technique, 10pcs.

Specimen carriers DN 3.0x0.8mm (gold-plated copper) with cylinder-shaped indentation. Indentation: 1.4mm diameter, 0.3mm deep. For high pressure freezing (HPM010 and HPM100), and freeze etching technique, 100pcs.

Specimen carriers DN 3.0x0.8mm (gold-plated copper) with cylinder-shaped indentation. Indentation: 1.0mm diameter, 0.55mm deep. For high pressure freezing (HPM010 and HPM100), and freeze etching technique, 10pcs.

No compressed air required, integrated optical filling level indicator, integrated filling device. Operating over pressure is max. 1.0bar, neck connecting flange DN50KF, port thread G¼. 60l dewar: Rate loss 1.0l/d, weight empty 26.4kg. Consisting of:
-1 LN2 Dewar
-1 Roller frame base
-1 Optical filling level indicator
-1 Internal pressure system
-1 Pressure control valve (0.07 - 0.8 bar)
-1 Pressure gauge
-2 Safety pressure relief valves (1.0 bar)
-1 Mounting ring and gasket
-1 Hand valve port

Styrofoam boxes in various sizes with covers to keep specimens in LN2 (ten-part).

Inside diameter 57mm, depth 210mm.

Covers the laboratory dewar 16LZ02058KN and prevents water vapor conaminating the LN2.

For the production of small quantities of liquid propane. This device consists of a small container to be placed on a tube, where it will be cooled by liquid nitrogen. Cryogen sprayed into the container will liquefy due to the low nitrogen temperature. The cryogen freezing bath fits into the 500ml laboratory dewar 16LZ02058KN.

for specimen carriers DN 4.6 x 0.6mm. For exact centering of two specimen carriers for double replica freeze fracture technique during freezing in nitrogen cryo-bath.

for cryo techniques. Handle insulated with PVC on both sides. Non-rusting, antimagnetic.

for cryo techniques. Non-rusting, antimagnetic and with sickle-shaped tips.

with extra fine goldplated tips Dumoxel No. 4. Tips are 10µm gold plated. Used for work with aggressive chemicals.

Made of stainless steel, with fine tips. Used for secure independent holding of e.g. single support grids, rust proof and antimagnetic. Length 108mm

Specimen carriers DN 3.0 x 0.8mm (Gold), with flat surface. For high pressure freezing (HPM010 and HPM100) and freeze etching technique, 10pcs.

Specimen carriers DN 3.0 x 0.8mm (Gold), with dome-shaped identation. Identation: 1.4mm diameter, 0.3mm deep. For high pressure freezing (HPM010 and HPM100), and freeze etching technique, 10pcs.

Specimen carriers DN 3.0 x 0.8mm (Gold), with cylinder-shaped indentation. Identation: 1.4mm diameter, 0.3mm deep. For high pressure freezing (HPM010 and HPM100), and freeze etching technique, 10pcs.

Specimen carriers DN 3.0 x 0,8mm (Gold), with cylinder-shaped indentation. Identation: 1mm diameter, 0.55mm deep. For high pressure freezing (HPM010 and HPM100), and freeze etching technique, 10pcs.

Specimen carriers suited for plunge freezing and freeze etching technique. Made of Gold, with flat surface. Dimensions: DN 4.6 x 0.6 mm Pack of 10

Specimen carriers suited for plunge freezing and freeze etching technique. Made of Gold, with hole. Dimensions: DN 4.6 x 0.6mm Hole: 1.0mm diameter Pack of 10

Specimen carriers suited for plunge freezing and freeze etching technique. Made of Gold, with hole. Dimensions: DN 4.6 x 0.6mm Hole: 2.0mm diameter Pack of 10

Specimen carriers suited for plunge freezing and freeze etching technique. Made of Gold, with graduated hole. Dimensions: DN 4.6 x 0.6mm Hole: 1.0mm diameter/ 1.5mm diameter Pack of 10

Manual Transfer Shuttle Portable cryo-vacuum chamber(one is included in cryo SEM sets). Consisting of:
-Manual manipulator, magnetic coupling
-Insulated mounting tip for specimen holder
-Interface for VCT100 docking station
-Turning mechanism, magnetic coupling
-Pneumatic high vacuum valve (VAT)
-LN2-mini dewar and cryo-shield
-No cable or hose connection
-No moving rotary or translation feedthroughs

LN2 filled cryo bath with adapter plate for VCT100 docking and pneumatic control of shuttle manipulations. Consisting of:
-Preparation bath under LN2- or N2 conditions
-Tiltable loading stage for sample holders
-Transparent isolation lid
-Manual LN2 valve
-Integrated LN2 storage dewar
-Docking station for VCT100 Transfer Shuttle
-Pneumatic flat valve
-Automatic N2 counterflow

Portable cryo-vacuum chamber (one is included in cryo SEM sets). Consisting of:
- Manual manipulator, magnetic coupling
- Insulated mounting tip for specimen holder
- Interface for EM VCT100 docking station
- Turning mechanism, magnetic coupling
- Pneumatic high vacuum valve (VAT)
- LN2-mini dewar and cryo-shield
- No cable or hose connection
- No moving rotary or translation feedthroughs

Load-lock manipulator for Zeiss SEM sample holder.
-Manual manipulator, magnetic coupling
-Mounting tip for Zeiss specimen holder
-Interface for EM VCT100 docking station
-Turning mechanism, magnetic coupling
-No cable or hose connection
-No moving rotary or translation feedthroughs

and Load-lock manipulator. Consisting of:
-Stand cpl.
-Interface for Shuttle valve
-Connector for compressed air

LN2 filled cryo bath with Cryo-TEM-Holder stage and adapter plate for VCT100 docking and pneumatic control of shuttle manipulations. Consisting of:
-Preparation bath under LN2- or N2 conditions
-Loading stage for Cryo-TEM-Holder
-Tiltable loading stage for sample holders
-Transparent isolation lid
-Manual LN2 valve
-Integrated LN2 storage dewar
-Docking station for EM VCT100 Transfer Shuttle
-Pneumatic flat valve
-Automatic N2 counterflow

Consisting of:
-LN2 dewar
-Dewar lid
-Insulating ring
-Specimen table holder tiltable
-Specimen platform
-Manipulator for specimen tables
-Rod for specimen table tilting

Cryo-SEM Set for Zeiss Auriga (Doorpl/Gis Port):
-Transfer-shuttle
-Load-lock cpl.for SEM
-Oil-free pumping unit for load-lock vacuum
-Adaptation set for SEM
-Cryo stage cpl.for SEM
-Controlled cold stage -150°C .. 60°C
-LN2-dewar and cryo-shield for SEM
-Controller VCT100 for cryo stage and load lock
-Operating panel with touch screen

Leica EM VCT100 load-lock set ISO-CF40 consisting of:
- Load-lock cpl. (room temperature)
- Oil-free pumping unit for load-lock vacuum
- Adaptation flange ISO-CF40
- Controller VCT100 basic for load lock
- Operating panel with touch screen

Portable cryo-vacuum chamber (one is included in cryo SEM sets). Consisting of:
-Manual manipulator, magnetic coupling
-Insulated mounting tip for specimen holder
-Interface for EM VCT100 docking station
-Turning mechanism, magnetic coupling
-Pneumatic high vacuum valve (VAT)
-LN2-mini dewar and cryo-shield
-No cable or hose connection
-No moving rotary or translation feedthroughs

Specimen carriers with flat surface Made of Copper, Gold plated,suited for high pressure freezing and freeze etching technique. Dimensions: DN 4.6 x 0.6 mm For double replica (mirror fracturing) with double sided sticky tape. Pack of 100

For mechanical removal of coated film from glass or metal surfaces. 224 x 158mm, 5 pieces

For mechanical removal of coated film from glass or metal surfaces. 224 x 158mm

SEM stub with M3 threaded pin, Aluminum, DN 20 mm, flat. (Pack of 10 pcs)

SEM stub with M3 threaded pin, Aluminum, DN 13 mm, with cavity DN 1.4 mm. (Pack of 10 pcs)

SEM stub with M3 threaded pin, Aluminum, DN 13 mm, flat. (Pack of 10 pcs)

SEM stub with M3 threaded pin,Aluminum, DN 13 mm, with cavity DN 7.5 mm. (Pack of 10 pcs.)

Consisting of:
-Transfer-shuttle
-Load-lock cpl. for SEM
-Oil-free pumping unit for load-lock vacuum
-Adaptation set for SEM
-Cryo stage cpl. for SEM
-Controlled cold stage -150°C .. 60°C
-LN2-dewar and cryo-shield for SEM
-Controller EM VCT100 for cryo stage and load lock
-Operating panel with touch screen

EM VCT100 Set attachable on different Scanning Electron Microscopes. Consisting of:
-Manual transfer-shuttle
-Docking station with tubing for SEM
-Oil-free pumping unit for load-lock vacuum
-Adaptation flange
-Cryo stage cpl. for SEM
-Controller for cryo stage and load lock
-Operating panel with touch screen
-Cooling bands
-LN2-dewar and cryo-shield for SEM
-Complete tubing for compressed air and for venting gas connections Attention:
- This is a dummy number for budgetary purposes.
-Final material-number will be submitted to you after clarification of all technical details and feasibility -> preorder acceptance form has to be completed to proceed
- Prices have been calculated for a standard configuration -> costs for projects exceeding the standard set up have to be charged additionally
- No order can be placed without being checked and approved by BU
- Delivery time 120 days after order receipt and clarification of all technical details and completion of Pre-order Acceptance form

EM VCT100 Set attachable on different Scanning Electron Microscopes. Consisting of:
-Manual transfer-shuttle
-Docking station with tubing for SEM
-Oil-free pumping unit for load-lock vacuum
-Adaptation flange
-Stage
-Controller basic
-Operating panel with touch screen
-Complete tubing for compressed air and for venting gas connections Attention:
- This is a dummy number for budgetary purposes.
-Final material-number will be submitted to you after clarification of all technical details and feasibility -> preorder acceptance form has to be completed to proceed
- Prices have been calculated for a standard configuration -> costs for projects exceeding the standard set up have to be charged additionally
- No order can be placed without being checked and approved by BU
- Delivery time 120 days after order receipt and clarification of all technical details and completion of Pre-order Acceptance form

Consisting of:
-Docking station with tubing
-Oil-free pumping unit for load-lock vacuum
-Adaptation flange
-Cryo stage
-Glovebox controller for cryo stage and load lock
-Operating panel glovebox with touch screen
-LN2-dewar and cryo-shield
-Complete tubing for compressed air and for venting gas connections Attention:
- This is a dummy number for budgetary purposes.
-Final material-number will be submitted to you after clarification of all technical details and feasibility -> preorder acceptance form has to be completed to proceed
- Prices have been calculated for a standard configuration -> costs for projects exceeding the standard set up have to be charged additionally
- No order can be placed without being checked and approved by BU
- Delivery time 120 days after order receipt and clarification of all technical details and completion of Pre-order Acceptance form

Consisting of:
-Docking station with tubing
-Oil-free pumping unit for load-lock vacuum
-Adaptation flange
-Glovebox controller basic for load lock
-Operating panel glovebox with touch screen
-Complete tubing for compressed air and for venting gas connections Attention:
- This is a dummy number for budgetary purposes.
-Final material-number will be submitted to you after clarification of all technical details and feasibility -> preorder acceptance form has to be completed to proceed
- Prices have been calculated for a standard configuration -> costs for projects exceeding the standard set up have to be charged additionally
- No order can be placed without being checked and approved by BU
- Delivery time 120 days after order receipt and clarification of all technical details and completion of Pre-order Acceptance form

for cutting frozen freeze-etch specimens. Without spacer pad. Angle of the blade 45°, sharp cutting edge! Dimensions: 15mm x 10mm, 2mm thick

Without fittings for fastening specimens. The specimens could be fixed directly onto the table with sticky tape or conductive carbon paint e.g.

For universal freeze fracturing. Clamp holder for DN 3mm specimen carriers and for various specimen shapes.

With a retaining spring for three DN 3x0.8mm specimen carriers. Also suited for EM PACT2 freeze fracture carriers (16706866).

For double replica technique (mirror fracturing). Spring loaded mirror fracturing holder for two DN 4.6 x 0.6mm specimen carrier sandwiches.

With fastening thread (M3) for screw-on SEM stubs.

Specimen holder for freeze-drying. Two magnetic strips hold the grids on their edge. For three DN 3mm grids.

For freeze-drying. With retaining spring for four DN 3mm grids.

Specimen carriers DN 3.0 x 0.8mm (Gold), with dome-shaped identation. Identation: 1.4mm diameter, 0.3mm deep. For high pressure freezing (HPM010 and HPM100), and freeze etching technique, 10pcs.

Specimen carriers DN 3.0 x 0.8mm (Gold), with cylinder-shaped indentation. Identation: 1.4mm diameter, 0.3mm deep. For high pressure freezing (HPM010 and HPM100), and freeze etching technique, 10pcs.

Specimen carriers DN 3.0 x 0,8mm (Gold), with cylinder-shaped indentation. Identation: 1mm diameter, 0.55mm deep. For high pressure freezing (HPM010 and HPM100), and freeze etching technique, 10pcs.

Specimen carriers DN 3.0 x 0.8mm (Gold), with flat surface. For high pressure freezing (HPM010 and HPM100) and freeze etching technique, 10pcs.

Specimen carriers DN 3.0 x 0.8mm (Gold), with dome-shaped identation. Identation: 1.4mm diameter, 0.3mm deep. For high pressure freezing (HPM010 and HPM100), and freeze etching technique, 10pcs.

Specimen carriers DN 3.0 x 0.8mm (Gold), with cylinder-shaped indentation. Identation: 1.4mm diameter, 0.3mm deep. For high pressure freezing (HPM010 and HPM100), and freeze etching technique, 10pcs.

Specimen carriers DN 3.0 x 0,8mm (Gold), with cylinder-shaped indentation. Identation: 1mm diameter, 0.55mm deep. For high pressure freezing (HPM010 and HPM100), and freeze etching technique, 10pcs.

Specimen carriers suited for plunge freezing and freeze etching technique. Made of Gold, with flat surface. Dimensions: DN 4.6 x 0.6 mm Pack of 10

Specimen carriers suited for plunge freezing and freeze etching technique. Made of Gold, with hole. Dimensions: DN 4.6 x 0.6mm Hole: 1.0mm diameter Pack of 10

Specimen carriers suited for plunge freezing and freeze etching technique. Made of Gold, with hole. Dimensions: DN 4.6 x 0.6mm Hole: 2.0mm diameter Pack of 10

Specimen carriers suited for plunge freezing and freeze etching technique. Made of Gold, with graduated hole. Dimensions: DN 4.6 x 0.6mm Hole: 1.0mm diameter/ 1.5mm diameter Pack of 10

Special specimen carriers made of gold coated copper for monolayer freeze fracture technique developed by A. Yee. Dimensions: 1.1mm x 4.4mm diameter (pack of 10)

Special specimen carriers made of glass for growing cell cultures, required for freeze fracture technique developed by A. Yee. Dimensions: 0.15mm x 4.0mm diameter (pack of 10)