Leica Science Lab - Tag : TEM https://www.leica-microsystems.com//science-lab/tag/?tx_leicaacademy_pi4%5Baction%5D=show&tx_leicaacademy_pi4%5Bcontroller%5D=Tag&tx_leicaacademy_pi4%5Btag%5D=599&cHash=1b774d9257a3653f6648fe7b24a52b0f Article tagged with TEM en-US https://www.leica-microsystems.com/20212 EM Sample Preparation Metallography Quality Assurance Stereo Microscopy 3-Dimensional Imaging of Macroscopic Defects in Aluminum Alloys The investigation of macroscale defects in aluminum (Al) alloys with a rapid 3-dimensional (3D) imaging approach is described in this report. Aluminum (Al) alloys play an important role in the production of aircraft and vehicles, as well as products in other industries. Defects present in the Al alloy used for the production of aircraft, vehicles, or other products can have a significant effect on their quality, performance, and lifetime. https://www.leica-microsystems.com/science-lab/3-dimensional-imaging-of-macroscopic-defects-in-aluminum-alloys/ Thu, 17 Oct 2019 07:00:00 +0000 PhD Wolfgang Grünewald, PhD James DeRose https://www.leica-microsystems.com/14345 EM Sample Preparation Introduction to Ultramicrotomy When studying samples, to visualize their fine structure with nanometer scale resolution, most often electron microscopy is used. There are 2 types: scanning electron microscopy (SEM) which images the sample surface or transmission electron microscopy (TEM) which requires a very thin, electron-transparent sample. Thus, to image the fine structure inside a sample using electron microscopy, the solution is to make very thin sections of it. https://www.leica-microsystems.com/science-lab/brief-introduction-to-ultramicrotomy/ Tue, 17 Sep 2019 09:06:00 +0000 Robert Ranner, PhD James DeRose https://www.leica-microsystems.com/20642 EM Sample Preparation High Resolution Array Tomography with Automated Serial Sectioning The optimization of high resolution, 3-dimensional (3D), sub-cellular structure analysis with array tomography using an automated serial sectioning solution, achieving a high section density on the carrier substrate, is described in this report. https://www.leica-microsystems.com/science-lab/high-resolution-array-tomography-with-automated-serial-sectioning/ Sun, 14 Oct 2018 22:00:00 +0000 Robert Ranner, PhD James DeRose https://www.leica-microsystems.com/20127 EM Sample Preparation Visualization of DNA Molecules Precise low angle rotary shadowing with heavy metals (like platinum) can be used in transmission electron microscopy (TEM) to observe molecular details of objects previously absorbed on a thin, low grain and electron-transparent carbon film. To achieve the highest contrast and better image quality, it is essential that the coating is directional, and it is given at a precise angle toward the sample. The fine grain of the metal layers and the homogeneous thickness of the coating material all over the sample surface are also crucial requirements to achieve high quality TEM images. This requires the method of e-beam evaporation a stream of evaporated material which is very directional, extremely homogeneous, cool and fine grained. https://www.leica-microsystems.com/science-lab/visualization-of-dna-molecules/ Wed, 02 May 2018 22:00:00 +0000 Michele Giannattasio, Gisela Höflinger https://www.leica-microsystems.com/19182 EM Sample Preparation Variety of RNAs in Peripheral Blood Cells, Plasma, and Plasma Fractions Human peripheral blood contains RNA in cells and in extracellular membrane vesicles, microvesicles and exosomes, as well as in cell-free ribonucleoproteins. Circulating mRNAs and noncoding RNAs, being internalized, possess the ability to modulate vital processes in recipient cells. In this study, with SOLiD sequencing technology, we performed identification, classification, and quantification of RNAs from blood fractions: cells, plasma, plasma vesicles pelleted at 16,000 https://www.leica-microsystems.com/science-lab/variety-of-rnas-in-peripheral-blood-cells-plasma-and-plasma-fractions/ Mon, 30 Jan 2017 10:22:00 +0000 https://www.leica-microsystems.com/18207 EM Sample Preparation Picea abies (L.) KARST - Sample Preparation for TEM Application Note for Leica EM AMW - Plants (5-years old) were grown in pots filled with soil and kept in greenhouse conditions. Five weeks before harvesting the plants were transferred into growth chambers and cultivated at a temperature of 20°C during daytime and 12°C overnight. The relative humidity was set at 60% and the photoactive radiation was 500 μmol m-2 s-1 during daytime. Sample preparation for transmission electron microscopy (TEM) was performed in order to develop a standard protocol that would reduce sample preparation time for TEM-investigations. Therefore the overall and fine structure of leaf cells prepared with the Leica EM AMW were compared with leaf cells that were prepared with a conventional fixation protocol at room temperature. https://www.leica-microsystems.com/science-lab/picea-abies-l-karst-sample-preparation-for-tem/ Mon, 23 Jan 2017 19:24:00 +0000 Prof. Bernd Zechmann, Prof. Günther Zellnig https://www.leica-microsystems.com/18319 EM Sample Preparation Maple (Acer saccharum) Leaves - High Pressure Freezing and Freeze Substitution for TEM Application Note for Leica EM HPM100 - Leaves were immersed in hexadecene and placed under a gentle (0.3 bar) vacuum for 10 minutes to evacuate the internal air spaces. The leaves were then trimmed to fit the carriers and placed in the 200 μm side of a 6 mm Type A specimen carrier. Free space was filled with additional hexadecene after which a 6 mm Type B specimen carrier was placed on top with the flat side down. https://www.leica-microsystems.com/science-lab/maple-acer-saccharum-leaves-high-pressure-freezing-and-freeze-substitution-for-tem/ Mon, 16 Jan 2017 17:08:00 +0000 Dr. Kim Rensing https://www.leica-microsystems.com/18249 EM Sample Preparation Removal of Surface Layers - Sample Preparation for SEM and TEM Application Note for Leica EM RES102 - Sometimes it is necessary to remove surface layers to gain access to the real surface structure. That can be a native oxide, or layers coming from the preparation process itself, like re-deposition. Depending on the layers thickness and the energy used for the cleaning process, it takes between a few seconds and half an hour. The energy depends on the milling rate of the material. https://www.leica-microsystems.com/science-lab/removal-of-surface-layers-sample-preparation-for-sem-and-tem/ Wed, 11 Jan 2017 10:10:00 +0000 PhD Wolfgang Grünewald https://www.leica-microsystems.com/18243 EM Sample Preparation Multilayer Systems with Widely Different Sputter Rates - Sample Preparation for TEM Application Note for Leica EM RES102 - The multi-layer system to be prepared in cross-section consists of a Si substrate, a TiN layer with a thickness of a few nm and a 500 nm W layer. All these components have extreme differences in their hardness, their atomic weight and in their sputter rates. A preparation of this kind of samples with sample rotation would lead to a wall overlying the area of the layers. https://www.leica-microsystems.com/science-lab/multilayer-systems-with-widely-different-sputter-rates-sample-preparation-for-tem/ Fri, 16 Dec 2016 16:57:00 +0000 PhD Wolfgang Grünewald https://www.leica-microsystems.com/18008 CLEM Fluorescence Microscopy EM Sample Preparation Correlative Cryo-Fluorescence and Cryo-Scanning Electron Microscopy as a Straightforward Tool to Study Host-Pathogen Interactions Correlative light and electron microscopy is an imaging technique that enables identification and targeting of fluorescently tagged structures with subsequent imaging at near-to-nanometer resolution. We established a novel correlative cryo-fluorescence microscopy and cryo-scanning electron microscopy workflow, which enables imaging of the studied object of interest very close to its natural state, devoid of artifacts caused for instance by slow chemical fixation. This system was tested by investigating the interaction of the zoonotic bacterium Borrelia burgdorferi with two mammalian cell lines of neural origin in order to broaden our knowledge about the cell-association mechanisms that precedes the entry of the bacteria into the cell. https://www.leica-microsystems.com/science-lab/correlative-cryo-fluorescence-and-cryo-scanning-electron-microscopy-as-a-straightforward-tool-to-study-host-pathogen-interactions/ Tue, 13 Dec 2016 07:58:00 +0000 Martin Strnad https://www.leica-microsystems.com/18225 EM Sample Preparation In-Containing Compound Semiconductors - Sample Preparation for TEM Application Note for Leica EM RES102 - Previous studies showed that surface accumulation of In occurs when InP was milled in a conventional way with Ar ions. The consequence is In islands on the sample surface. This leads to low quality of TEM samples. To remove these islands, reactive ion milling with iodine ions (RIBE / CAIBE) can be used. This method has the disadvantage of polluting the ion guns and the vacuum system of the ion milling device and leads to chemical reactions with the sample material. To avoid these problems we prepared these samples very gently with low energy Ar ions. https://www.leica-microsystems.com/science-lab/in-containing-compound-semiconductors-sample-preparation-for-tem/ Mon, 12 Dec 2016 10:13:00 +0000 PhD Wolfgang Grünewald https://www.leica-microsystems.com/18983 EM Sample Preparation High-Resolution Carbon Coating: How much Carbon is too much? Application Note for Leica EM ACE600 - Carbon support films are routinely used for high resolution TEM. Thickness is one of the main criteria to assess its usefulness for a particular experiment. Within that respect graphene (oxide) layers are frequently used. However, charge dissipation and mechanical stability towards high probe currents and high voltages, including long term acquisition protocols are equally important. https://www.leica-microsystems.com/science-lab/high-resolution-carbon-coating-how-much-carbon-is-too-much/ Wed, 23 Nov 2016 11:56:00 +0000 PhD Frédéric Leroux https://www.leica-microsystems.com/18976 EM Sample Preparation Each Atom Counts: Protect Your Samples Prior to FIB Processing Application Note for Leica EM ACE600 - Focused ion beam (FIB) technology has become an indispensable tool for site-specific TEM sample preparation. It allows to extract electron transparent specimens with nanometer precision using a focused Ga+ ion beam. https://www.leica-microsystems.com/science-lab/each-atom-counts-protect-your-samples-prior-to-fib-processing/ Wed, 23 Nov 2016 11:43:00 +0000 PhD Frédéric Leroux https://www.leica-microsystems.com/18255 EM Sample Preparation "Shallow Trench Isolation" Structures - Sample Preparation for TEM Application Note for Leica EM RES102 - The cross-sectional preparation of structured semiconductor materials requires a very thorough mechanical pre-preparation. In doing this, it must be ensured that the structure of interest should be located as close to the centre of the sample as possible. As the sample will be ion milled from both sides, a specific preparation of the structure is necessary in most cases, which means that you must thin these structures from both sides. https://www.leica-microsystems.com/science-lab/shallow-trench-isolation-structures-sample-preparation-for-tem/ Fri, 18 Nov 2016 16:50:00 +0000 PhD Wolfgang Grünewald https://www.leica-microsystems.com/18241 EM Sample Preparation Metal Films and Sheets - Sample Preparation for TEM Application Note for Leica EM RES102 - Most metal films already have a thickness that requires no further mechanical pre-preparation. Frequently, however, they are also domed, which can lead to undefined milling angles. This is a disadvantage, particularly for films that contain inclusions, and that therefore mostly require very flat milling angles. Metal sheets are thicker than 100 µm. Mechanical pre-preparation is necessary to obtain an acceptable initial thickness and a good surface quality for ion milling. https://www.leica-microsystems.com/science-lab/metal-films-and-sheets-sample-preparation-for-tem/ Wed, 16 Nov 2016 13:32:00 +0000 PhD Wolfgang Grünewald https://www.leica-microsystems.com/18818 EM Sample Preparation Ultra-thin Carbon Support Films for Improved STEM-EELS Analysis of Nanoparticles Application Note for Leica EM ACE600 - Recent developments in aberration corrected transmission electron microscopes as well as further improvements in monochromaters and spectrometers have pushed the attainable energy resolution for Electron energy loss spectroscopy (EELS) to 100 meV and beyond. STEM-EELS of individual nanomaterials can be challenging due the necessity of a support film. https://www.leica-microsystems.com/science-lab/ultra-thin-carbon-support-films-for-improved-stem-eels-analysis-of-nanoparticles/ Wed, 21 Sep 2016 11:27:00 +0000 PhD Frédéric Leroux https://www.leica-microsystems.com/18820 EM Sample Preparation Ways to Reveal More from your Samples: Ultra-Thin Carbon Films Application Note for Leica EM ACE600 - Much of the battle involved in obtaining good transmission electron microscopy data is in the specimen preparation itself. Even though some nanomaterials are already electron transparent (e.g. nanoparticles and proteins) and often do not require further thinning procedures, they need to be dispersed onto thin support films. https://www.leica-microsystems.com/science-lab/ways-to-reveal-more-from-your-samples-ultra-thin-carbon-films/ Wed, 21 Sep 2016 11:23:00 +0000 PhD Frédéric Leroux, Jan de Weert https://www.leica-microsystems.com/18239 EM Sample Preparation Ion Beam Polishing of Sample Surfaces - Sample Preparation for SEM Application Note for Leica EM RES102 - Ion milling can be used to reduce the roughness of sample surfaces. Small angles less than 6° with respect to the sample surface are necessary. The high voltage depends on the material to be prepared. The reason for the levelling effect is the different milling angle of flat and rough surface areas. The milling rate is lower for small angles. The rough surface area will be faster milled. Ion polishing is often the final step of sample preparation. The prerequisite is a perfect mechanical prepreparation as samples with deep surface scratches cannot be ion polished. Soft materials usually have a smeared sample surface after mechanical polishing. It is necessary to remove this smeared material before ion polishing. Otherwise the above mentioned polishing effect does not work. https://www.leica-microsystems.com/science-lab/ion-beam-polishing-of-sample-surfaces-sample-preparation-for-sem/ Tue, 06 Sep 2016 11:11:00 +0000 PhD Wolfgang Grünewald https://www.leica-microsystems.com/18209 EM Sample Preparation Ceramics - Sample Preparation for TEM Application Note for Leica EM RES102 - Ceramic samples are mostly very brittle, and are therefore very difficult to thin mechanically to a low starting thickness for ion beam milling. The ion beam milling of insulators often leads to static charging of the surface of the sample. This, in turn, reduces the sputter rate. When using the Ti standard holder (standard TEM holder), however, sufficient secondary electrons are created by the ion beam also falling on the sample holder to largely compensate for the static charging. https://www.leica-microsystems.com/science-lab/ceramics-sample-preparation-for-tem/ Mon, 15 Aug 2016 18:46:00 +0000 PhD Wolfgang Grünewald https://www.leica-microsystems.com/17998 EM Sample Preparation Arabidopsis thaliana(L.) Accession Col Application Note for Leica EM AMW - Plants were grown in growth chambers under defined conditions. After stratification for 4 days at 4°C seeds were grown in pots with soil with 9/15 hours day/night photoperiod. Day and night temperatures were 22°C and 18°C, respectively, the relative humidity was 60% and the plants were kept at 100% relative soil water content. Light intensity varied between 110 and 140 μmol m-2 s-1. https://www.leica-microsystems.com/science-lab/arabidopsis-thalianal-accession-col/ Mon, 01 Aug 2016 13:03:00 +0000 Prof. Bernd Zechmann, Prof. Günther Zellnig https://www.leica-microsystems.com/17382 CLEM Imaging of Host Cell-bacteria Interactions using Correlative Microscopy under Cryo-conditions Pathogenic bacteria have developed intriguing strategies to establish and promote infections in their respective hosts. Most bacterial pathogens initiate infectious diseases by adhering to host cells surface. Knowledge of the interplay between the pathogenic organism and the host cells can provide fundamental new insight into the underlying mechanisms of the infectious process and therefore of the disease. Various microscopy techniques have proven to be critical tools to study these events. https://www.leica-microsystems.com/science-lab/imaging-of-host-cell-bacteria-interactions-using-correlative-microscopy-under-cryo-conditions/ Tue, 01 Mar 2016 11:34:00 +0000 Martin Strnad https://www.leica-microsystems.com/17358 EM Sample Preparation TEM Sample Preparation Made Easy - Prepare TEM Specimen by Broad Beam Argon Ion Milling Quantitative and analytical analysis at high spatial resolution places stringent demands on the quality of the produced TEM specimens. Pristine and high-quality samples are indispensible for atomic resolution TEM analysis. In this application note a general procedure for obtaining cross-sectional and plan-view TEM specimens using the Leica EM RES102 ion milling system is outlined. The procedure described below can be easily adapted for a large range of materials e.g. thin film materials, semiconductors, multilayered materials, ceramics, superconductors, … https://www.leica-microsystems.com/science-lab/tem-sample-preparation-made-easy-prepare-tem-specimen-by-broad-beam-argon-ion-milling/ Tue, 15 Dec 2015 12:03:00 +0000 PhD Frédéric Leroux https://www.leica-microsystems.com/15596 EM Sample Preparation Transmission Electron Microscopy Sample Preparation Protocols for the Ultrastructural Study of Cysts of Free-living Protozoa Cysts of free-living protozoa have an impact on the ecology and epidemiology of bacteria because they may act as a transmission vector or shelter the bacteria against hash environmental conditions. Detection and localization of intracystic bacteria and examination of the en- and excystment dynamics is a major challenge because no detailed protocols for ultrastructural analysis of cysts are currently available. https://www.leica-microsystems.com/science-lab/transmission-electron-microscopy-sample-preparation-protocols-for-the-ultrastructural-study-of-cysts-of-free-living-protozoa/ Thu, 02 Jul 2015 17:25:00 +0000 https://www.leica-microsystems.com/15509 CLEM Correlative In-Resin Super-Resolution and Electron Microscopy Using Standard Fluorescent Proteins We introduce a method for correlative in-resin super-resolution fluorescence and electron microscopy (EM) of biological structures in mammalian culture cells. Cryo-fixed resin embedded samples offer superior structural preservation, performing in-resin super-resolution, however, remains a challenge. https://www.leica-microsystems.com/science-lab/correlative-in-resin-super-resolution-and-electron-microscopy-using-standard-fluorescent-proteins/ Thu, 04 Jun 2015 10:28:00 +0000 https://www.leica-microsystems.com/14978 Super-Resolution Confocal Microscopy Detailed Morphological Characterisation of Hendra Virus Infection of Different Cell Types Using Super-Resolution and Conventional Imaging Hendra virus (HeV) is a pleomorphic virus belonging to the Paramyxovirus family. Our long-term aim is to understand the process of assembly of HeV virions. As a first step, we sought to determine the most appropriate cell culture system with which to study this process, and then to use this model to define the morphology of the virus and identify the site of assembly by imaging key virus encoded proteins in infected cells. https://www.leica-microsystems.com/science-lab/detailed-morphological-characterisation-of-hendra-virus-infection-of-different-cell-types-using-super-resolution-and-conventional-imaging/ Wed, 13 May 2015 20:09:00 +0000 https://www.leica-microsystems.com/14920 Multiphoton Microscopy CLEM Live-Cell Imaging Correlating Intravital Multi-Photon Microscopy to 3D Electron Microscopy of Invading Tumor Cells Using Anatomical Reference Points Cancer research unsing multiphoton microscopy and 3D electron microscopy. Correlative microscopy combines the advantages of both light and electron microscopy to enable imaging of rare and transient events at high resolution. Performing correlative microscopy in complex and bulky samples such as an entire living organism is a time-consuming and error-prone task. https://www.leica-microsystems.com/science-lab/correlating-intravital-multi-photon-microscopy-to-3d-electron-microscopy-of-invading-tumor-cells-using-anatomical-reference-points/ Fri, 24 Apr 2015 13:06:00 +0000 https://www.leica-microsystems.com/14406 EM Sample Preparation Brief Introduction to Freeze Fracture and Etching Freeze fracture describes the technique of breaking a frozen specimen to reveal internal structures. Freeze etching is the sublimation of surface ice under vacuum to reveal details of the fractured face that were originally hidden. A metal/carbon mix enables the sample to be imaged in a SEM (block-face) or TEM (replica). It is used to investigate for instance cell organelles, membranes, layers and emulsions. https://www.leica-microsystems.com/science-lab/brief-introduction-to-freeze-fracture-and-etching/ Wed, 01 Oct 2014 09:27:00 +0000 Gisela Höflinger https://www.leica-microsystems.com/14347 EM Sample Preparation Brief Introduction to Specimen Trimming Before ultrathin sectioning a sample with an ultramicrotome it has to be pre-prepared. For this pre-preparation, special attention must be paid to the sample size (size of the section), location of the sample (targeting) and accuracy of the block-face edges. This process is generally called trimming, wherein the sample is shaped mainly to a frustum of a pyramid. https://www.leica-microsystems.com/science-lab/brief-introduction-to-specimen-trimming/ Mon, 22 Sep 2014 13:56:00 +0000 Robert Ranner https://www.leica-microsystems.com/14343 EM Sample Preparation Glycerol Spraying/Platinum Low Angle Rotary Shadowing of DNA with the Leica EM ACE600 e-beam Glycerol spraying/low angle rotary shadowing (Aebi and Baschong, 2006) is a preparation technique used in biology to visualize structures yielding insufficent contrast with other techniques, due to their small diameter. This method is commonly used for specimens which include proteins with coiled coil domains or DNA. https://www.leica-microsystems.com/science-lab/glycerol-sprayingplatinum-low-angle-rotary-shadowing-of-dna-with-the-leica-em-ace600-e-beam/ Thu, 04 Sep 2014 14:33:00 +0000 Dr. Guenter Resch https://www.leica-microsystems.com/10717 EM Sample Preparation Rapid Immunohistochemical Diagnosis of Tobacco Mosaic Virus Disease by Microwave-assisted Plant Sample Preparation Immunoelectron microscopy is a powerful method to diagnose viral diseases and to study the distribution of the viral agent within plant cells and tissues. Nevertheless, current protocols for the immunological detection of viral diseases with transmission electron microscopy (TEM) in plants take between 3 and 6 days and are therefore not suited for rapid diagnosis of virus diseases in plants. In this study, we describe a method that allows rapid cytohistochemical detection of tobacco mosaic virus (TMV) in leaves of tobacco plants. https://www.leica-microsystems.com/science-lab/rapid-immunohistochemical-diagnosis-of-tobacco-mosaic-virus-disease-by-microwave-assisted-plant-sample-preparation/ Wed, 16 Oct 2013 20:36:00 +0000 Prof. Günther Zellnig, Stefan Möstl, Prof. Bernd Zechmann https://www.leica-microsystems.com/10222 EM Sample Preparation Brief Introduction to Coating Technology for Electron Microscopy Coating of samples is required in the field of electron microscopy to enable or improve the imaging of samples. Creating a conductive layer of metal on the sample inhibits charging, reduces thermal damage and improves the secondary electron signal required for topographic examination in the SEM. https://www.leica-microsystems.com/science-lab/brief-introduction-to-coating-technology-for-electron-microscopy/ Wed, 28 Aug 2013 12:10:00 +0000 Gisela Höflinger https://www.leica-microsystems.com/10281 CLEM EM Sample Preparation Live-Cell Imaging Confocal Microscopy A Precise and Rapid Mapping Protocol for Correlative Light and Electron Microscopy of small invertebrate organisms CLEM (correlative live cell and electronmicroscopy) seeks to bridge the data acquired with different imaging strategies, typically between light microscopy and electron microscopy. It has been successfully applied in cell cultures, although its use in multicellular systems is hampered by difficulties in locating the ROI (region of interest). https://www.leica-microsystems.com/science-lab/a-precise-and-rapid-mapping-protocol-for-correlative-light-and-electron-microscopy-of-small-invertebrate-organisms/ Tue, 16 Jul 2013 09:26:00 +0000 https://www.leica-microsystems.com/9555 EM Sample Preparation Immersion Freezing of Suspended Particles and Cells for Cryo-Electron Microscopy Immersion freezing of thin aqueous specimens is an essential preparation technique for cryo-transmission electron microscopy (cryo-TEM), aiming to preserve fragile biological structures such as molecules and cells in their hydrated environment for a close-to-native visualization. For successful experiments, vitreous ice must be produced, surface contamination must be avoided, and, most important, the natural state of the structure must be preserved. https://www.leica-microsystems.com/science-lab/immersion-freezing-of-suspended-particles-and-cells-for-cryo-electron-microscopy/ Fri, 12 Apr 2013 11:48:00 +0000 Dr. Guenter Resch, Marlene Brandstetter, Lisa Königsmaier, Edith Urban, Angela M. Pickl-Herk https://www.leica-microsystems.com/7405 EM Sample Preparation Perusing Alternatives for Automated Staining of TEM Thin Sections Contrast in transmission electron microscopy (TEM) is mainly produced by electron scattering at the specimen: Structures that strongly scatter electrons are referred to as electron dense and appear as dark areas in the bright fi eld image, while structures which scatter fewer electrons appear bright (electron transparent). https://www.leica-microsystems.com/science-lab/perusing-alternatives-for-automated-staining-of-tem-thin-sections/ Mon, 04 Feb 2013 23:00:00 +0000 Nicole Fellner, Marlene Brandstetter, Karin Trimmel, Dr. Guenter Resch https://www.leica-microsystems.com/5734 EM Sample Preparation University of Wollongong Electron Microscopy Centre The University of Wollongong has a diverse range of materials research programs that includes metallurgy for mining, manufacturing, steel making and transport; polymers for solar cells, energy storage and bionic implants; and superconducting and electronic materials for commercialization, energy storage, telecommunications and medical applications. Electron microscopy is an integral part of this research, due to the chemical and structural information that can be provided down to the atomic scale. https://www.leica-microsystems.com/science-lab/university-of-wollongong-electron-microscopy-centre/ Thu, 17 Jan 2013 23:00:00 +0000 Darren Attard, Tony Romeo https://www.leica-microsystems.com/10998 EM Sample Preparation Microwave Assisted Rapid Diagnosis of Plant Virus Diseases by Transmission Electron Microscopy Investigations of ultrastructural changes induced by viruses are often necessary to clearly identify viral diseases in plants. With conventional sample preparation for transmission electron microscopy (TEM) such investigations can take several days and are therefore not suited for a rapid diagnosis of plant virus diseases. Microwave fixation can be used to drastically reduce sample preparation time for TEM investigations with similar ultrastructural results as observed after conventionally sample preparation https://www.leica-microsystems.com/science-lab/microwave-assisted-rapid-diagnosis-of-plant-virus-diseases-by-transmission-electron-microscopy/ Fri, 14 Oct 2011 03:28:00 +0000 Prof. Bernd Zechmann, Prof. Günther Zellnig