Contact & Support

EBSD

Show:
RSS feed
  • Cross Sectioning of Copper for Electron Backscattered Diffraction (EBSD)

    Application Note for Leica EM TIC 3X - Electron Backscattered Diffraction (EBSD) is a surface technique creating diffraction patterns (Kikuchi-bands). It can be used for crystal orientation mapping, defect studies, phase identification, grain boundary studies and morphological studies. The information depth is just a few nm, therefore good sample preparation is very important to avoid damages.
    Read article
  • Cross Sectioning of a Multilayer System - Preparation of a Perfect Sample Surface for EBSD

    Application Note for Leica EM TIC 3X - Electron Backscattered Diffraction (EBSD) is a surface technique creating a diffraction pattern (Kikuchi-bands). It can be used for crystal orientation mapping, defect studies, phase identification, grain boundary studies and morphology studies. The information depth is just a few nm. Therefore good sample preparation is very important to avoid any damage. This is very difficult in case of multilayer system with big differences in hardness.
    Read article
  • Cross Sectioning of Ni/Cu on Steel for EBSD

    Application Note for Leica EM TIC 3X - Electron Backscattered Diffraction (EBSD) is a surface technique creating a diffraction pattern (Kikuchi-bands). It can be used for crystal orientation mapping, defect studies, phase identification, grain boundary studies and morphology studies. The information depth is just a few nm. Therefore a good sample preparation is very important.
    Read article
  • Cross Section of an Aluminium Sample for Electron Backscattered Diffraction (EBSD)

    Application Note for Leica EM TIC020, Leica EM TIC 3X - Electron backscattered diffraction (EBSD) is for example used to examine the crystallographic orientation of material. The sample preparation for such samples is sometimes very tricky as the depth of information is just few nm (~20nm or less). That means the sample surface must be flat and free of preparation artefacts. Mechanical polishing leads mostly to sample surfaces damages.
    Read article
  • High Quality Sample Preparation for EBSD Analysis by Broad Ion Beam Milling

    Electron Backscatter Diffraction technique (EBSD) is known as a "surface" technique because electron diffraction is generated within a few tens of nanometers of the sample surface. Therefore, the specimen surface should be exempt of any damages in order to produce EBSD patterns. Here, we present a successful and efficient EBSD sample polishing of two very challenging specimens prepared by broad ion beam milling.
    Read article