Leica Science Lab - Tag : Freeze Etching https://www.leica-microsystems.com//science-lab/tag/tags/freeze-etching/show/Tag/ Article tagged with Freeze Etching en-US https://www.leica-microsystems.com/25036 EM Sample Preparation Expert Knowledge on High Pressure Freezing and Freeze Fracturing in the Cryo SEM Workflow Get an insight in the working methods of the laboratory and learn about the advantages of Cryo SEM investigation in EM Sample Preparation. Find out how high pressure freezing, freeze fracturing and cryo transfer add to the Cryo SEM workflow and how the Leica portfolio ensures the compatibility between these different steps. https://www.leica-microsystems.com//science-lab/expert-knowledge-on-high-pressure-freezing-and-freeze-fracturing-in-the-cryo-sem-workflow/ Thu, 23 May 2019 22:00:00 +0000 Gisela Höflinger https://www.leica-microsystems.com/19176 EM Sample Preparation Drosophila larvae - Sample Preparation for Cryo-SEM Application Note for Leica EM ACE900 - Drosophila larvae were sandwiched between two 3 mm aluminum slit carriers with the 100 μm cavities facing each other and high-pressure frozen with a Leica EM HPM100. No ethanol as synchronization media was used, 1-hexadecene was used as filler. The wholes of the slit carriers were filled with filter tips dipped in 1-hexadecene to keep the carrier sandwich complete after freezing. https://www.leica-microsystems.com//science-lab/drosophila-larvae-sample-preparation-for-cryo-sem/ Mon, 30 Jan 2017 09:50:00 +0000 Dr. Andres Kaech, Prof. Damian Brunner https://www.leica-microsystems.com/19179 EM Sample Preparation Giardia lamblia - Sample Preparation for Cryo-SEM Application Note for Leica EM ACE900 - A 100 mesh copper grid (12 um thickness) was dipped into a concentrated Giardia suspension and sandwiched between two flat 3 mm aluminum specimen carriers with scratched surfaces. Subsequently, the sandwich was transferred to the widened hole of a middle plate (3.1 mm diameter). A 50 um spacer ring was added on top and the specimen immediately frozen with an HPM100 high-pressure freezing machine without using alcohol as synchronization fluid. https://www.leica-microsystems.com//science-lab/giardia-lamblia-sample-preparation-for-cryo-sem/ Mon, 30 Jan 2017 09:35:00 +0000 Dr. Andres Kaech, Joe Paulin Zumthor https://www.leica-microsystems.com/18284 EM Sample Preparation Cryo-SEM Imaging of Latex Paint Application Note for Leica EM VCT100, Leica EM ACE600 - A thin layer of latex paint was spread on a clean, scored, silicon chip. The sample was immediately plunge frozen in liquid ethane and transferred under LN2 to the Leica EM VCT100 loading station where it was placed in the customized sample holder. https://www.leica-microsystems.com//science-lab/cryo-sem-imaging-of-latex-paint/ Thu, 16 Jun 2016 16:50:00 +0000 Dr. Levi Felts, Dr. Kim Rensing, Chris Frethem https://www.leica-microsystems.com/14406 EM Sample Preparation Brief Introduction to Freeze Fracture and Etching Freeze fracture describes the technique of breaking a frozen specimen to reveal internal structures. Freeze etching is the sublimation of surface ice under vacuum to reveal details of the fractured face that were originally hidden. A metal/carbon mix enables the sample to be imaged in a SEM (block-face) or TEM (replica). It is used to investigate for instance cell organelles, membranes, layers and emulsions. https://www.leica-microsystems.com//science-lab/brief-introduction-to-freeze-fracture-and-etching/ Wed, 01 Oct 2014 09:27:00 +0000 Gisela Höflinger