Fale conosco
Fale conosco

Leica DM4000 M Microscópio vertical versátil para análise de materiais

Produto arquivado
Substituído por Leica DM4000 M LED

Publications 2018

Silicon nanoribbon pH sensors protected by a barrier membrane with carbon nanotube porins
Chen X, Zhang H, Tunuguntla R, Noy A
Nano Letters
2018 pp: acs.nanolett.8b02898

Application of Raman spectroscopy as thermal maturity probe in shale petroleum systems: insights from natural and artificial maturation series
Hackley P, Lünsdorf N
Energy & Fuels
2018 pp: acs.energyfuels.8b02171

Process Development of Large Area R2R Printing and Sintering of Conductive Patterns by Inkjet and Infra-Red Technologies Tailored for Printed Electronics
Mitra K, Kapadia S, Hartwig M, Sowade E, Xu Z, et. al.
NIP & Digital Fabrication Conference
2018 vol: 2018 (1) pp: 21-32

Serrated flow behavior of GH536 superalloy under different loading rates at room temperature
Gao W, Ma D, Zhao L, Ye F, Shao L, et. al.
Rare Metals
2018 pp: 1-7

Evolution of In783 alloy in microstructure and properties enduring different service times
Han Z, Du J, Liang J, Zhang Z
Rare Metals
2018 pp: 1-8

Internal friction behavior of Ni50.5Mn25Ga24.5 alloy with cellular microstructure
Liu J, Wang J, Jiang C, Xu H, Xiao Z
Rare Metals
2018 pp: 1-6

Process-Defect-Structure-Property Correlations During Laser Powder Bed Fusion of Alloy 718: Role of In Situ and Ex Situ Characterizations
Foster S, Carver K, Dinwiddie R, List F, Unocic K, et. al.
Metallurgical and Materials Transactions A
2018 vol: 49 (11) pp: 5775-5798

Does a Self-Etching Ceramic Primer Improve Bonding to Lithium Disilicate Ceramics? Bond Strengths and FESEM Analyses
Lopes G, Perdigão J, Baptista D, Ballarin A
Operative Dentistry
2018 pp: 17-355-L

Tunable Interfacial Properties in Silk Ionomer Microcapsules with Tailored Multilayer Interactions
Geryak R, Quigley E, Kim S, Korolovych V, Calabrese R, et. al.
Macromolecular Bioscience
2018 pp: 1800176

Sol–Gel Preparation of Laser Damage Resistant and Moisture-Proof Antireflective Coatings for KDP Crystals
Wang X, Zhao H, Cao Y, Niu Y, Shen J
Langmuir
2018 vol: 34 (35) pp: 10262-10269

Using Cupriethylenediamine (CED) Solution to Decrease Cellulose Fibre Network Strength for Removal of Pulp Fibre Plugs
Zhang W, Christensen R, Lutes R, Liu X, Zhang J, et. al.
The Canadian Journal of Chemical Engineering
2018

Geometry-Induced Spatial Variation of Microstructure Evolution During Selective Electron Beam Melting of Rene-N5
Frederick C, Plotkowski A, Kirka M, Haines M, Staub A, et. al.
Metallurgical and Materials Transactions A
2018 vol: 49 (10) pp: 5080-5096

Effect of surface scallop tool marks generated in micro-milling repairing process on the optical performance of potassium dihydrogen phosphate crystal
Cheng J, Xiao Y, Liu Q, Yang H, Zhao L, et. al.
Materials & Design
2018 vol: 157 pp: 447-456

Effect of soft substrate topography on tribological behavior of multifunctional DLC coatings
Soprano P, Salvaro D, Giacomelli R, Binder C, Klein A, et. al.
Journal of the Brazilian Society of Mechanical Sciences and Engineering
2018 vol: 40 (8) pp: 371

Enhanced mechanical properties of hypoeutectic Al-10Mg2Si cast alloys by Bi addition
Wu X, Wang Y, Wang K, Zhao R, Wu F
Journal of Alloys and Compounds
2018 vol: 767 pp: 163-172

Highly transmissive subtractive color filters based on an all-dielectric metasurface incorporating TiO2 nanopillars
Koirala I, Lee S, Choi D
Optics Express
2018 vol: 26 (14) pp: 18320

Flow behaviors and microstructural evolutions of a novel high-Co powder metallurgy superalloy during hot working
Tan L, He G, Li Y, Liu F, Nie Y, et. al.
Journal of Materials Processing Technology
2018 vol: 262 pp: 221-231

Effects of the welding inclusion and notch on the fracture behaviors of low-alloy steel
Chen G, Luo H, Yang H, Han Z, Lin Z, et. al.
Journal of Materials Research and Technology
2018

Oxidation behaviour of T91/347H welds
Mittal R, Sidhu B
Journal of Materials Processing Technology
2018 vol: 261 pp: 266-279

Nanostructured hydroxyapatite networks: Synergy of physical and chemical cues to induce an osteogenic fate in an additive-free medium
Sartuqui J, Gardin C, Ferroni L, Zavan B, Messina P
Materials Today Communications
2018 vol: 16 pp: 152-163

Microstructural aspects of the transition between two regimes in orthogonal cutting of AISI 1045 steel
Medina-Clavijo B, Saez-de-Buruaga M, Motz C, Soler D, Chuvilin A, et. al.
Journal of Materials Processing Technology
2018 vol: 260 pp: 87-96

Investigation of the Microstructure of Laser-Arc Hybrid Welded Boron Steel
Son S, Lee Y, Choi D, Cho K, Shin S, et. al.
JOM
2018 vol: 70 (8) pp: 1548-1553

Permineralized Calamitean Axes from the Upper Permian of Xinjiang, Northwest China and Its Paleoecological Implication
Chen F, Shi X, Yu J, Chi H, Zhu J, et. al.
Journal of Earth Science
2018 vol: 29 (2) pp: 237-244

TiN Nanoporous Electrode Covered by Single Cell as Bio-Electronic Sensor of Radiation Hazard
Stupin D
Semiconductors
2018 vol: 52 (5) pp: 600-601

Double-sided hybrid laser-MIG welding plus MIG welding of 30-mm-thick aluminium alloy
Jiang Z, Hua X, Huang L, Wu D, Li F, et. al.
The International Journal of Advanced Manufacturing Technology
2018 vol: 97 (1-4) pp: 903-913

Histological and Histomorphometric Response to SocketKAP™ and SocketKAGE™ Used for Ridge Preservation and Repair: Results From a Randomized Controlled Clinical Trial
Bakhshalian N, Abdelhamid A, Park Y, Zadeh H
Journal of Oral and Maxillofacial Surgery
2018 vol: 76 (9) pp: 1884-1892

High-performance H2 sensors with selectively hydrophobic micro-plate for self-aligned upload of Pd nanodots modified mesoporous In2O3 sensing-material
Chen Y, Xu P, Li X, Ren Y, Deng Y
Sensors and Actuators B: Chemical
2018 vol: 267 pp: 83-92

Undifferentiated Inorganics in Coal Fly Ash and Bottom Ash: Calcispheres, Magnesiacalcispheres, and Magnesiaspheres
Valentim B, Białecka B, Gonçalves P, Guedes A, Guimarães R, et. al.
Minerals
2018 vol: 8 (4) pp: 140

Relationship between the weld pool convection and metallurgical and mechanical properties in hybrid welding for butt joint of 10-mm-thick aluminum alloy plate
Huang L, Hua X, Wu D
Welding in the World
2018 vol: 62 (5) pp: 895-903

A technical study of the materials and manufacturing process used in the Gallery wall paintings from the Jokhang temple, Tibet
Song Y, Gao F, Nevin A, Guo J, Zhou X, et. al.
Heritage Science
2018 vol: 6 (1) pp: 18

Ultra-fast polymer optical fibre Bragg grating inscription for medical devices
Bonefacino J, Tam H, Glen T, Cheng X, Pun C, et. al.
Light: Science & Applications
2018 vol: 7 (3) pp: 17161

Cure Cycle Optimization of Rapidly Cured Out-Of-Autoclave Composites
Dong A, Zhao Y, Zhao X, Yu Q, Dong A, et. al.
Materials
2018 vol: 11 (3) pp: 421

Experimental and numerical studies on compaction of carbon fiber composite joint with variable cross-section using thermal expansion process
Zhang W, Liang X, Li M, Gu Y, Li Y, et. al.
Polymer Composites
2018

Relation between solidification microstructure and coercivity in MnAl permanent-magnet alloys
Jia Y, Wu Y, Zhao S, Wang J, Jiang C
Intermetallics
2018 vol: 96 pp: 41-48

Overexpression of COPS3 promotes clear cell renal cell carcinoma progression via regulation of Phospho-AKT(Thr308), Cyclin D1 and Caspase-3
Hong Y, Huang X, An L, Ye H, Ma K, et. al.
Experimental Cell Research
2018 vol: 365 (2) pp: 163-170

Long crack growth and crack closure in high strength nodular cast iron
Heine L, Bezold A, Broeckmann C
Engineering Fracture Mechanics
2018

Enhanced tribological performance of hybrid polytetrafluoroethylene/Kevlar fabric composite filled with milled pitch-based carbon fibers
Sun W, Gu Y, Yang Z, Li M, Wang S, et. al.
Journal of Applied Polymer Science
2018 vol: 135 (19) pp: 46269

Effect of Holding Pressure on Microstructure and Mechanical Properties of A356 Aluminum Alloy
Wu X, Zhang H, Ma Z, Jia L, Zhang H
Journal of Materials Engineering and Performance
2018 vol: 27 (2) pp: 483-491

Resistance heating forming process based on carbon fiber veil for continuous glass fiber reinforced polypropylene
Liu C, Li M, Gu Y, Gong Y, Liang J, et. al.
Journal of Reinforced Plastics and Composites
2018 pp: 073168441775105

Work Function and Conductivity of Inkjet-Printed Silver Layers: Effect of Inks and Post-treatments
Mitra D, Mitra K, Dzhagan V, Pillai N, Zahn D, et. al.
Journal of Electronic Materials
2018 vol: 47 (3) pp: 2135-2142

Hydraulic and mechanical dysfunction of Norway spruce sapwood due to extreme summer drought in Scandinavia
Rosner S, Gierlinger N, Klepsch M, Karlsson B, Evans R, et. al.
Forest Ecology and Management
2018 vol: 409 pp: 527-540

Microstructure and mechanical properties of double-wire + arc additively manufactured Al-Cu-Mg alloys
Qi Z, Cong B, Qi B, Sun H, Zhao G, et. al.
Journal of Materials Processing Technology
2018 vol: 255 pp: 347-353

Influence of last stage heat treatment on microstructure and mechanical properties of laser additive manufactured AF1410 steel
Li Y, Cheng X, Liu D, Wang H
Materials Science and Engineering: A
2018 vol: 713 pp: 75-80

Microstructural Evolution of AerMet100 Steel Coating on 300M Steel Fabricated by Laser Cladding Technique
Liu J, Li J, Cheng X, Wang H
Metallurgical and Materials Transactions A
2018 vol: 49 (2) pp: 595-603

Growth of atomically thin MoS2 flakes on high-κ substrates by chemical vapor deposition
Zhao M, Zhang L, Liu M, Dong Y, Zou C, et. al.
Journal of Materials Science
2018 vol: 53 (6) pp: 4262-4273

Publications 2017

Molecular phylogeny and revision of the false violin spiders (Araneae: Drymusidae) of Africa
Labarque F, Pérez-González A, Griswold C
Zoological Journal of the Linnean Society
2017

Nanoscale geochemical and geomechanical characterization of organic matter in shale
Yang J, Hatcherian J, Hackley P, Pomerantz A
Nature Communications
2017 vol: 8 (1) pp: 2179

Effect of holding pressure on microstructure and fracture behavior of low-pressure die cast A356-T6 alloy
Wu X, Yun Y, Zhang H, Ma Z, Jia L, et. al.
Materials Research Express
2017 vol: 4 (12) pp: 126501

Corrosion resistance of low-carbon steel modified by plasma nitriding and diamond-like carbon
Fenili C, de Souza F, Marin G, Probst S, Binder C, et. al.
Diamond and Related Materials
2017 vol: 80 pp: 153-161

Comparative study of ultra-lightweight pulp foams obtained from various fibers and reinforced by MFC
Liu Y, Kong S, Xiao H, Bai C, Lu P, Wang S
Carbohydrate Polymers
2017

Drug–Excipient Interactions in the Solid State: The Role of Different Stress Factors
Gressl C, Brunsteiner M, Davis A, Landis M, Pencheva K, et. al.
Molecular Pharmaceutics
2017 pp: acs.molpharmaceut.7b00677

Pore-types and pore-network evolution in Upper Devonian-Lower Mississippian Woodford and Mississippian Barnett mudstones: Insights from laboratory thermal maturation and organic petrology
Ko L, Ruppel S, Loucks R, Hackley P, Zhang T, Shao D
International Journal of Coal Geology
2017

Laser-induced damage of 355 nm high-reflective mirror caused by nanoscale defect
Zhang D, Zhu M, Li Y, Zhang W, Cai X, et. al.
Journal of Wuhan University of Technology-Mater. Sci. Ed.
2017 vol: 32 (5) pp: 1057-1060

Water effects on the deformation and fracture behaviors of the multi-scaled cellular fibrous bamboo
Chen G, Luo H, Yang H, Zhang T, Li S
Acta Biomaterialia
2017

Assessment of microstructure and property of a service exposed turbine blade made of K417 superalloy
Wang B, Wang C, Shi D, Yang X, Li Z
IOP Conference Series: Materials Science and Engineering
2017 vol: 231 (1) pp: 012084

Organic petrology and micro-spectroscopy of Tasmanites microfossils: applications to kerogen transformations in the early oil window
Hackley P, Walters C, Kelemen S, Mastalerz M, Lowers H
Organic Geochemistry
2017

Nucleation Crystallography of Ni Grains on CrFeNb Inoculants Investigated by Edge-to-Edge Matching Model in an IN718 Superalloy
Yang W, Qu P, Liu L, Jie Z, Huang T, et. al.
Advanced Engineering Materials
2017 pp: 1700568

A new glance on R2MGe6 (R = rare earth metal, M = another metal) compounds. An experimental and theoretical study of R2PdGe6 germanides
Freccero R, Solokha P, Proserpio D, Saccone A, De Negri S
Dalton Trans.
2017 vol: 46 (40) pp: 14021-14033

Anisotropic single-variant of (Mn54Al46)97C3
Zhang C, Zhang T, Wang J, et. al.
Scripta Materialia
2018 vol: 143 pp: 72-76

Effects of pre-creep on the dislocations of 316LN Austenite stainless steel
Pei H, Hui J, Hua H, Feng Z, Xu X
Materials Research Express
2017 vol: 4 (9) pp: 096509

Moisture-induced phase separation and recrystallization in amorphous solid dispersions
Luebbert C, Sadowski G
International Journal of Pharmaceutics
2017 vol: 532 (1) pp: 635-646

Study on colored pattern pigments of a royal Taoist temple beside the Forbidden City (Beijing, China)
Lei Z, Wu W, Shang G, Wu Y, Wang J
Vibrational Spectroscopy
2017 vol: 92 pp: 234-244

Alterations of apoptosis and autophagy in developing brain of rats with epilepsy: Changes in LC3, P62, Beclin-1 and Bcl-2 levels
Li Q, Han Y, Du J, et. al.
Neuroscience Research
2017

Microstructural evolution during reheating of A356 machining chips at semisolid state
Wang F, Zhang W, Xiao W, Yamagata H, Ma C
International Journal of Minerals, Metallurgy, and Materials
2017 vol: 24 (8) pp: 891-900

Geometrical analysis of woven fabric microstructure based on micron-resolution computed tomography data
Krieger H, Seide G, Gries T, Stapleton S
Applied Composite Materials
2017 pp: 1-15

Effect of multiple thermal cycles on metallurgical and mechanical properties during multi-pass gas metal arc welding of Al 5083 alloy
Jiang Z, Hua X, Huang L, Wu D, Li F
The International Journal of Advanced Manufacturing Technology
2017 pp: 1-13

Gamma Ray Shielding Property of Tungsten Powder Modified Continuous Basalt Fiber Reinforced Epoxy Matrix Composites
Hou Y, Li M, Gu Y, Yang Z, Li R, et. al.
Polymer Composites
2017

Gothic green glazed tile from Malbork Castle: multi-analytical study
Svorová Pawełkowicz S, Rohanová D, Svora P
Heritage Science
2017 vol: 5 (1) pp: 27

One-dimensional CdSxSe1−x nanoribbons for high-performance rigid and flexible photodetectors
Peng M, Wen Z, Shao M, Sun X
J. Mater. Chem. C
2017 vol: 5 (30) pp: 7521-7526

Investigation on a ramp solution heat treatment for a third generation nickel-based single crystal superalloy
Zhang Y, Liu L, Huang T, et. al.
Journal of Alloys and Compounds
2017 vol: 723 pp: 922-929

Oxidation-induced damage of an uncoated and coated nickel-based superalloy under simulated gas environment
Li S, Qi H, Yang X
Rare Metals
2017 pp: 1-6

Review on Bioremediation of Methyl Parathion Contaminated Agricultural Soil by Microorganisms
Jyoti Kiran Bara, Ritu Soni, Sakshi Jaiswal K
International Journal of Applied and Pure Science and Agriculture
2017 vol: 3 (5) pp: 10-19

Microstructural control during laser additive manufacturing of single-crystal nickel-base superalloys: New processing–microstructure maps involving powder feeding
Liang Y, Cheng X, Li J, Wang H
Materials & Design
2017 vol: 130 pp: 197-207

The evolution and function of spider feet (Araneae: Arachnida): multiple acquisitions of distal articulations
Labarque F, Wolff J, Michalik P, Griswold C, Ramírez M
Zoological Journal of the Linnean Society
2017 vol: 181 (2) pp: 308-341

Model for multi-filamentary conduction in graphene/hexagonal-boron-nitride/graphene based resistive switching devices
Pan C, Miranda E, Villena M, Xiao N, Jing X, et. al.
2D Materials
2017 vol: 4 (2) pp: 025099

Effect of thermal stability of γ′ phase on the recrystallization behaviors of Ni-based single crystal superalloys
Qin L, Pei Y, Li S, Zhao X, Gong S, Xu H
Materials & Design
2017 vol: 130 pp: 69-82

Precise Patterning of Organic Single Crystals via Capillary-Assisted Alternating-Electric Field
Zhang Y, Jie J, Sun Y, Jeon S, Zhang X, et. al.
Small
2017 vol: 13 (25) pp: 1604261

Brittle fracture behavior of a laser additive manufactured near-β titanium alloy after low temperature aging
He B, Li J, Cheng X, Wang H
Materials Science and Engineering: A
2017 vol: 699 pp: 229-238

Evolution of microstructure and mechanical properties of A356 aluminium alloy processed by hot spinning process
Wu X, Zhang H, Chen H, Jia L, Zhang H
China Foundry
2017 vol: 14 (2) pp: 138-144

The Effect of Thermo-Mechanical Treatment on Structure of Ultrahigh Carbon PM Steel
Nikiel P, Szczepanik S, Skrzypek S, Rogal Ł
Journal of Materials Engineering and Performance
2017 vol: 26 (4) pp: 1562-1568

The influence of normal load on the tribological performance of electrophoretic deposition prepared graphene coating on micro-crystalline diamond surface
Chen S, Shen B, Sun F
Diamond and Related Materials
2017 vol: 76 pp: 50-57

Electric Field Tuning Molecular Packing and Electrical Properties of Solution-Shearing Coated Organic Semiconducting Thin Films
Molina-Lopez F, Yan H, Gu X, Kim Y, Toney M, et. al.
Advanced Functional Materials
2017 vol: 27 (8) pp: 1605503

Hydrogen reduction of tungsten oxides: Alkali additions, their effect on the metal nucleation process and potassium bronzes under equilibrium conditions
Zimmerl T, Schubert W, Bicherl A, Bock A
International Journal of Refractory Metals and Hard Materials
2017 vol: 62 pp: 87-96

Tensile property improvement of TWIP-cored three-layer steel sheets fabricated by hot-roll-bonding with low-carbon steel or interstitial-free steel
Park J, Kim J, Kang M, Sohn S, Cho W, et. al.
Scientific Reports
2017 vol: 7 pp: 40231

The loading-rate dependent tensile behavior of CNT film and its bismaleimide composite film
Zhang M, Li M, Wang S, Wang Y, Zhang Y, et. al.
Materials & Design
2017 vol: 117 pp: 37-46

Enhancement on the tribological performance of diamond films by utilizing graphene coating as a solid lubricant
Shen B, Chen S, Chen Y, Sun F
Surface and Coatings Technology
2017 vol: 311 pp: 35-45

Comparison between microwave and thermal curing of a polyimide adhesive end-caped with phenylethynyl groups
Wang K, Yuan X, Zhan M
International Journal of Adhesion and Adhesives
2017 vol: 74 pp: 28-34

Fabrication and characterization of structural/dielectric three-phase composite: Continuous basalt fiber reinforced epoxy resin modified with graphene nanoplates
Chen C, Gu Y, Wang S, Zhang Z, Li M, et. al.
Composites Part A: Applied Science and Manufacturing
2017 vol: 94 pp: 199-208

Experimental optimization of laser additive manufacturing process of single-crystal nickel-base superalloys by a statistical experiment design method
Liang Y, Li J, Li A, Cheng X, Wang S, et. al.
Journal of Alloys and Compounds
2017 vol: 697 pp: 174-181

Isothermal section at 600°C of the Yb−Pd−Sn system (Pd ≤ 75 at.%)
Gastaldo F,, Giovannini M, Strydom A, Djoumessi R, Čurlík I, et. al.
Journal of Alloys and Compounds
2017 vol: 694 pp: 185-192

Publications 2016

Integrated High-Performance Infrared Phototransistor Arrays Composed of Nonlayered PbS–MoS2 Heterostructures with Edge Contacts
Wen Y, Yin L, He P, Wang Z, Zhang X, et. al.
Nano Letters
2016 pp: acs.nanolett.6b02881

Microscopic Studies of Calcium Sulfate Crystallization and Transformation at Aqueous–Organic Interfaces
Ravenhill E, Kirkman P, Unwin P
Crystal Growth & Design
2016 vol: 16 (10) pp: 5887-5895

Enhanced Grain Refinement and Porosity Control of the Polycrystalline Superalloy by a Modified Thermally Controlled Solidification
Jie Z, Zhang J, Huang T, Su H, Li Y, et. al.
Advanced Engineering Materials
2016 vol: 18 (10) pp: 1785-1791

The design challenge in printing devices and circuits: Influence of the orientation of print patterns in inkjet-printed electronics
Sowade E, Polomoshnov M, Baumann R
Organic Electronics
2016 vol: 37 pp: 428-438

Variations in the cutting performance of PVD-coated tools in milling Ti6Al4V, explained through temperature-dependent coating properties
Michailidis N
Surface and Coatings Technology
2016 vol: 304 pp: 325-329

Influence of B4C particle reinforcement on mechanical and machining properties of Al6061/B4C composites
Karabulut Ş, Karakoç H, Çıtak R
Composites Part B: Engineering
2016 vol: 101 pp: 87-98

Hydrogen reduction of tungsten oxides: Alkali additions, their effect on the metal nucleation process and potassium bronzes under equilibrium conditions
Zimmerl T Schubert W Bicherl A Bock A
International Journal of Refractory Metals and Hard Materials
2016

Bimorph Silk Microsheets with Programmable Actuating Behavior: Experimental Analysis and Computer Simulations
Ye C Nikolov S Geryak R Calabrese R Ankner J et. al.
ACS Applied Materials & Interfaces
2016 pp: acsami.6b05156

Phase selections and mechanical properties of ternary Cr-Nb-Ti alloys under rapid solidification
Xue Y Li S Zhong H Li K Fu H et. al.
Journal of Alloys and Compounds
2016

Hot deformation behavior and microstructural evolution of powder metallurgical TiAl alloy
Liu N Li Z Xu W Wang Y Zhang G et. al.
Rare Metals
2016 pp: 1-6

Thickness-dependent morphologies of Ag on n-layer MoS2 and its surface-enhanced Raman scattering
Deng Y Chen M Zhang J Wang Z Huang W et. al.
Nano Research
2016 vol: 9 (6) pp: 1682-1688

Preparation and engineering of oriented 2D covalent organic framework thin films
Gou X Zhang Q Wu Y Zhao Y Shi X et. al.
RSC Adv.
2016 vol: 6 (45) pp: 39198-39203

Enhancement of fracture toughness, mechanical and thermal properties of rubber/epoxy composites by incorporation of graphene nanoplatelets
Wang F Drzal L Qin Y Huang Z
Composites Part A: Applied Science and Manufacturing
2016 vol: 87 pp: 10-22

Ionic liquid crystals based on viologen dimers: tuning the mesomorphism by varying the conformational freedom of the ionic layer
Casella G Causin V Rastrelli F Saielli G
Liquid Crystals
2016 vol: 43 (9) pp: 1161-1173

Research on carbon fiber/epoxy interfacial bonding characterization of transverse fiber bundle composites fabricated by different preparation processes: Effect of fiber volume fraction
Qi G Zhang B Yu Y
Polymer Testing
2016 vol: 52 pp: 150-156 

Rapid microwave sintering of carbon nanotube-filled AZ61 magnesium alloy composites
Akinwekomi A Law W Tang C Chen L Tsui C et. al.
Composites Part B: Engineering
2016 vol: 93 pp: 302-309

Late Cenozoic fire enhancement response to aridification in mid-latitude Asia: Evidence from microcharcoal records
Miao Y Fang X Song C Yan X Zhang P et. al.
Quaternary Science Reviews
2016 vol: 139 pp: 53-66

Investigation on the effects of parameters on hot cracking and tensile shear strength of overlap joint in laser welding dissimilar Al alloys
Zhang Y Lu F Cui H Cai Y Guo S et. al.
The International Journal of Advanced Manufacturing Technology
2016 pp: 1-10

PCM-in-water emulsion for solar thermal applications: The effects of emulsifiers and emulsification conditions on thermal performance, stability and rheology characteristics
Zhang, Xiyao;  Wu, Jian-yong;  Niu, Jianlei (2016)
Solar Energy Materials and Solar Cells vol. 147 p. 211-224

Fabrication of microlens array on silicon surface using electrochemical wet stamping technique
Lai, Lei-Jie;  Zhou, Hang;  Zhu, Li-Min (2015)
Applied Surface Science

Upscaling of the Inkjet Printing Process for the Manufacturing of Passive Electronic Devices
Sternkiker, Christoph;  Sowade, Enrico;  Mitra, Kalyan Yoti;  Zichner, Ralf;  Baumann, Reinhard R. (2016)
Electron Devices, IEEE Transactions on vol. 63 (1) p. 426-431

Sulfur K-edge XANES of lazurite: Toward determining the provenance of lapis lazuli
Gambardella, Alessa A.;  Schmidt Patterson, Catherine M.;  Webb, Samuel M.;  Walton, Marc S. (2016)
Microchemical Journal vol. 125 p. 299-307

Publications 2015

Investigations on the wettability of graphene on a micron-scale hole array substrate
Zhao, Yun;  Wang, Gang;  Huang, Wenbin;  Fan, Xiaokun;  Deng, Ya et al. (2015)
RSC Adv. vol. 6 (3) p. 1999-2003

Hydrolytically Stable Thiol–ene Networks for Flexible Bioelectronics
Reit, Radu;  Zamorano, Daniel;  Parker, Shelbi;  Simon, Dustin;  Lund, Benjamin et al. (2015)
ACS Appl. Mater. Interfaces vol. 7 (51) p. 28673-28681

Cold plasma welding of polyaniline nanofibers with enhanced electrical and mechanical properties
Ye, Dong;  Yu, Yao;  Liu, Lin;  Lu, Xinpei;  Wu, Yue (2015)
Nanotechnology vol. 26 (49) p. 495302

The effects of nanosized particles on microstructural evolution of an in-situ TiB2/6063Al composite produced by friction stir processing
Chen, Z.;  Li, J.;  Borbely, A.;  Ji, G.;  Zhong, S.Y. et al. (2015)
Materials & Design vol. 88 p. 999-1007

Recombinant Lipase Engineered with Amphipathic and Coiled-Coil Peptides
Yang, Kyung Seok;  Sung, Bong Hyun;  Park, Myung Keun;  Lee, Jun Hyoung;  Lim, Ki Jung et al. (2015)
ACS Catal. vol. 5 (9) p. 5016-5025

Solubility and Caloric Properties of Cinnarizine
Paus, Raphael;  Hart, Elena;  Ji, Yuanhui;  Sadowski, Gabriele (2015)
J. Chem. Eng. Data vol. 60 (8) p. 2256-2261

Effect of Ni content on thermal and radiation resistance of VVER RPV steel
Shtrombakh, Ya.I.;  Gurovich, B.A.;  Kuleshova, E.A.;  Frolov, A.S.;  Fedotova, S.V. et al. (2015)
Journal of Nuclear Materials vol. 461 p. 292-300

Design and analysis of the cross-linked dual helical micromixer for rapid mixing at low Reynolds numbers
Liu, Keyin;  Yang, Qing;  Chen, Feng;  Zhao, Yulong;  Meng, Xiangwei et al. (2015)
Microfluidics and Nanofluidics vol. 19 (1) p. 169-180

Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing
Wang, T.;  Zhu, Y.Y.;  Zhang, S.Q.;  Tang, H.B.;  Wang, H.M. (2015)
Journal of Alloys and Compounds vol. 632 p. 505-513

Viscosity control and reactivity improvements of cellulose fibers by cellulase treatment
Duan, Chao;  Verma, Saurabh Kumar;  Li, Jianguo;  Ma, Xiaojuan;  Ni, Yonghao (2015)
Cellulose

Spinel type twins of the new cubic Er6Zn23Ge compound
Solokha P De Negri S Proserpio D Saccone A (2015)
Zeitschrift für Kristallographie - Crystalline Materials

High-Dose Menaquinone-7 Supplementation Reduces Cardiovascular Calcification in a Murine Model of Extraosseous Calcification
Scheiber, Daniel;  Veulemans, Verena;  Horn, Patrick;  Chatrou, Martijn;  Potthoff, Sebastian et al. (2015)
Nutrients vol. 7 (8) p. 6991-7011

Corrosion behavior of a novel Mg–13Li–X alloy with different grain sizes by rapid solidification rate
Wu, Bao-Liang;  Chen, Bing;  Wang, Cheng-Wei;  Jiao, Jing-Ye;  Shen, Qi-Chao et al. (2015)
Rare Metals

Polarization-tuned Dynamic Color Filters Incorporating a Dielectric-loaded Aluminum Nanowire Array
Shrestha, Vivek Raj;  Lee, Sang-Shin;  Kim, Eun-Soo;  Choi, Duk-Yong (2015)
Scientific Reports vol. 5 p. 12450

Iridium Oxide (IrOx) serves as adhesion promoter for conducting polymers on neural microelectrodes
Boehler, C.;  Oberueber, F.;  Stieglitz, T.;  Asplund, M.
IEEE p. 410-413

Influence of pin geometry and process parameters on friction stir lap welding of AA5754-H22 thin sheets
Costa, M.I.;  Verdera, D.;  Costa, J.D.;  Leitao, C.;  Rodrigues, D.M. (2015)
Journal of Materials Processing Technology vol. 225 p. 385-392

Anisotropic shrinkage during hip of encapsulated powder
Van Nguyen, C.;  Bezold, A.;  Broeckmann, C. (2015)
Journal of Materials Processing Technology vol. 226 p. 134-145

Small-volume multiparametric electrochemical detection at low cost polymeric devices featuring nanoelectrodes
Kitsara, Maria;  Cirera, Josep Maria;  Aller-Pellitero, Miguel;  Sabaté, Neus;  Punter, Jaume et al. (2015)
SPIE Microtechnologies p. 95180Z-95180Z-8

High temperature corrosion of carbon/carbon composites in Zr–Ti melts during liquid metal infiltration
Zeng, Yi;  Xiong, Xiang;  Wang, Dini;  Wu, Liang;  Chen, Zhaoke et al. (2015)
Corrosion Science vol. 98 p. 98-106

Comprehensive nucleation mechanisms of quasi-monolayer graphene grown on Cu by chemical vapor deposition
Ning, Jing;  Wang, Dong;  Han, Dang;  Shi, Yonggui;  Cai, Weiwei et al. (2015)
Journal of Crystal Growth vol. 424 p. 55-61

Lamellar Microstructure Alignment in Ti-47Al Alloy by Electromagnetic Confinement and Directional Solidification Using a Seed
Du, Yujun;  Shen, Jun;  Xiong, Yilong;  Ren, Chunhe;  Fu, Hengzhi (2015)
JOM    vol. 67 (6) p. 1258-1264

Effect of electrospun fibers of polyhydroxybutyrate filled with different organoclays on morphology, biodegradation, and thermal stability of poly(ε-caprolattone)
Marega, Carla;  Marigo, Antonio (2015)
Journal of Applied Polymer Science vol. 132 (31)

Dual chronoamperometric detection of enzymatic biomarkers using magnetic beads and a low-cost flow cell
Moral-Vico, Javier;  Barallat, Jaume;  Abad, Llibertat;  Olivé-Monllau, Rosa;  Muñoz-Pascual, Francesc Xavier et al. (2015)
Biosensors and Bioelectronics vol. 69 p. 328-336

A Late-Eocene palynological record from the Hoh Xil Basin, northern Tibetan Plateau, and its implications for stratigraphic age, paleoclimate and paleoelevation
Miao, Yunfa;  Wu, Fuli;  Chang, Hong;  Fang, Xiaomin;  Deng, Tao et al. (2015)
Gondwana Research

Vacancy Ordering as a Driving Factor for Structural Changes in Ternary Germanides: The New R2Zn1–xGe6 Series of Polar Intermetallics (R = Rare-Earth Metal)
Solokha, Pavlo;  De Negri, Serena;  Proserpio, Davide M.;  Blatov, Vladislav A.;  Saccone, Adriana (2015)
Inorg. Chem. vol. 54 (5) p. 2411-2424

An experimental investigation of compaction behavior of carbon non-crimp fabrics for liquid composite molding
Li, Long;  Zhao, Yan;  Yang, Jin;  Zhang, Jindong;  Duan, Yuexin (2015)
Journal of Materials Science vol. 50 (7) p. 2960-2972

Microstructures and mechanical properties of dissimilar T91/347H steel weldments
Mittal, Rutash;  Sidhu, Buta Singh (2015)
Journal of Materials Processing Technology vol. 220 p. 76-86

Hyper-branch sensing polymer batch self-assembled on resonant micro-cantilevers with a coupling-reaction route
Guo, Shuanbao;  Xu, Pengcheng;  Yu, Haitao;  Li, Xinxin;  Cheng, Zhenxing (2015)
Sensors and Actuators B: Chemical vol. 209 p. 943-950

Effect of modulation periods on the microstructure and mechanical properties of DLC/TiC multilayer films deposited by filtered cathodic vacuum arc method
Xu, Zhaoying;  Sun, H.;  Leng, Y.X.;  Li, Xueyuan;  Yang, Wenmao et al. (2015)
Applied Surface Science vol. 328 p. 319-324

Study of mechanical properties and high temperature oxidation behavior of a novel cold-spray Ni-20Cr coating on boiler steels
Kaur, Narinder;  Kumar, Manoj;  Sharma, Sanjeev K.;  Kim, Deuk Young;  Kumar, S. et al. (2015)
Applied Surface Science    vol. 328 p. 13-25

Palynofacies and source rock potential of Jurassic sequences on the Arruda sub-basin (Lusitanian Basin, Portugal)
Paula Alexandra Gonçalves, Taís Freitas da Silva, João Graciano Mendonça Filho, Deolinda Flores (2015)
Marine and Petroleum Geology 59 p. 575-592

Publications 2014

Influence of Initial Microstructures on Deformation Behavior of 316LN Austenitic Steels at 400-900 °C
Pei H Li S Wang L Zhang H Zhao Z Wang X (2014)
Journal of Materials Engineering and Performance vol: 24 (2) pp: 694-699

Contributed Review: Optical micro- and nanofiber pulling rig
Ward, J. M.;  Maimaiti, A.;  Le, Vu H.;  Chormaic, S. Nic (2014)
Review of Scientific Instruments vol. 85 (11) p. 111501

Thermoelectric and mechanical properties of Mg–Al–Sb alloys
E. Altin, E. Oz, M. Erdem, S. Demirel, Y. Aydogdu, S. Altin (2014)
Journal of Materials Science

Radiolytic alteration of biopolymers in the Mulga Rock (Australia) uranium deposit
Caroline M.B. Jaraula, Lorenz Schwark, Xavier Moreau, Walter Pickel, Leon Bagas, Kliti Grice (2014)
Applied Geochemistry

Evaluation of carbon fiber/epoxy interfacial strength in transverse fiber bundle composite: Experiment and multiscale failure modeling
Guocheng Qi, Shanyi Du, Boming Zhang, Zhanwen Tang, Yalin Yu (2014)
Composites Science and Technology 105 p. 1-8

Aluminum Plasmonics Based Highly Transmissive Polarization-Independent Subtractive Color Filters Exploiting a Nano-patch Array
Vivek R Shrestha, Sang-Shin Lee, Eun-Soo Kim, Duk-Yong Choi (2014)
Nano letters

Large-scale assembly of organic micro/nanocrystals into highly ordered patterns and their applications for strain sensors.
Chao Gong, Wei Deng, Bin Zou, Yuliang Xing, Xiujuan Zhang, Xiaohong Zhang, Jiansheng Jie (2014)
ACS applied materials & interfaces 6 (14) p. 11018-24

PCM in Water Emulsions: Supercooling Reduction Effects of Nano-Additives, Viscosity Effects of Surfactants and Stability
Xiyao Zhang, Jianlei Niu, Shuo Zhang, Jian-Yong Wu (2014)
Advanced Engineering Materials

Tensile behaviour of 316LN stainless steel at elevated temperatures
H. X. Pei, H. L. Zhang, L. X. Wang, S. L. Li, D. Z. Li, X. T. Wang (2014)
Materials at High Temperatures p. 1878641314Y.000

Study of 6,13-bis(tri-isopropylsilylethynyl) pentacene (TIPS-pentacene crystal) based organic field effect transistors (OFETs)
Ghulam Murtaza, Ishtiaq Ahmad, HongZheng Chen, Jiake Wu (2014)
Synthetic Metals 194 p. 146-152

Effects of Annealing Treatment Prior to Cold Rolling on the Edge Cracking Phenomenon of Ferritic Lightweight Steel
Seok Su Sohn, Byeong-Joo Lee, Jai-Hyun Kwak, Sunghak Lee (2014)
Metallurgical and Materials Transactions A   

Novel magnesium alloy Mg-2La caused no cytotoxic effects on cells in physiological conditions
Andreas Weizbauer, Jan-Marten Seitz, Peter Werle, Jan Hegermann, Elmar Willbold, Rainer Eifler, Henning Windhagen, Janin Reifenrath, Hazibullah Waizy (2014)
Materials Science and Engineering

Antifouling Coating of Cellulose Acetate Thin Films with Polysaccharide Multilayers
Tamilselvan Mohan, Rupert Kargl, Karin Eva Tradt, Martin R. Kulterer, Matej Braćić, Silvo Hribernik, Karin Stana-Kleinschek, Volker Ribitsch (2014)
Carbohydrate Polymers

Fabrication of highly ordered/switchable polymer nanogratings for nano-actuators using nanoimprint lithography
Donghai Du, Hongying Wen, Zhijun Hu, Yuyan Weng, Weidong Zhang (2014)
Nanotechnology 25 (19) p. 195503

Reinforcement of bacterial cellulose aerogels with biocompatible polymers
N. Pircher, S. Veigel, N. Aigner, J.M. Nedelec, T. Rosenau, F. Liebner (2014)
Carbohydrate Polymers

Highly Stretchable Transistors Using a Microcracked Organic Semiconductor
Alex Chortos, Josh Lim, John W F To, Michael Vosgueritchian, Thomas J Dusseault, Tae-Ho Kim, Sungwoo Hwang, Zhenan Bao (2014)
Advanced materials

Combined effects of hydrogen annealing on morphological, electrical and structural properties of graphene/r-sapphire
Jing Ning, Dong Wang, Jingdong Yan, Dang Han, Zheng Chai, Weiwei Cai, Jincheng Zhang, Yue Hao (2014)
Carbon

Programmable Arrays of “Micro-Bubble” Constructs via Self-Encapsulation
Chunhong Ye, Dhaval D. Kulkarni, Hongqi Dai, Vladimir V. Tsukruk (2014)
Advanced Functional Materials

Surface Morphology and Threading Dislocation Conversion Behavior during Solution Growth of 4H-SiC Using Al-Si Solvent
Shunta Harada, Yuji Yamamoto, Shi Yu Xiao, Miho Tagawa, Toru Ujihara
Materials Science Forum 778-780 p. 67-70

Electrochemical micromachining with wet stamping: instrument design and experimental investigation
Lei-Jie Lai, Hang Zhou, Yu-Jie Du, Chun-Xia Li, Li Zhang, Li-Min Jiang, Li-Min Zhu (2014)
Precision Engineering

Design and verification of thermomechanical parameters of P/M Ti6Al4V alloy forging
Marek Wojtaszek, Tomasz Sleboda (2014)
Journal of Alloys and Compounds

Real-time monitoring of surface-confined platelet activation on TiO2
Angelika Kunze, Camilla Hesse, Sofia Svedhem (2014)
Colloids and Surfaces B: Biointerfaces 116 p. 446-451

Publications 2013

Effect of CO, NOx and SO2 on ROS production, photosynthesis and scorbate-glutathione pathway to induce Fragaria × annasa as a hyperaccumulator
Sowbiya Muneer, Tae Hwan Kim, Byung Chul Choi, Beom Seon Lee, Jeong Hyun Lee (2013)
Redox Biology

Petrographical properties of a semi-precious coaly stone, oltu stone, from eastern turkey
Selami Toprak (2013)
International Journal of Coal Geology

Patterning of hafnia and titania via gas-phase soft lithography combined with Atomic Layer Deposition
Shannon M. Notley, Andrew Fogden (2013)
Applied Surface Science

Megasonic Cleaning of Blanket and Patterned Samples in Carbonated Ammonia Solutions for Enhanced Particle Removal and Reduced Feature Damage
Zhenxing Han, Manish Keswani, Srini Raghavan (2013)
IEEE Transactions on Semiconductor Manufacturing 26 (3) p. 400-405

In situ (Al3Zrp+ Al2O3np)/2024Al metal matrix composite with controlled reinforcement architecture fabricated by reaction hot pressing
B. Kaveendran, G.S. Wang, L.J. Huang, L. Geng, Y. Luo, H.X. Peng (2013)
Materials Science and Engineering: A)

Petrographical, chemical and FT-IR properties of a suberinitic coal from Aydin-Germencik area, Western Turkey
Emine Cicioglu Sutcu, Selami Toprak (2013)
International Journal of Coal Geology

Influence of solution flow on step bunching in solution growth of SiC
Background image
Scroll to top