お問い合わせ
Leica DMI3000 M Inverted Microscopes Light Microscopes Products Home Leica Leica Microsystems

工業用倒立顕微鏡<br> Leica DMI3000 M

アーカイブした製品
置き換える Leica DMi8 M / C / A

Publications 2018

The behavior and mechanism of void self-shrinkage in diffusion bonded 1Cr11Ni2W2MoV steel joint: Effect of temperature and void morphology
Zhang C, Li M, Li H
Journal of Manufacturing Processes
2018 vol: 35 pp: 71-78 Microstructure evolution of Ti-6Al-2Zr-1Mo-1V alloy and its mechanism in multi-pass flow forming
Wang X, Zhan M, Fu M, Gao P, Guo J, et. al.
Journal of Materials Processing Technology
2018 vol: 261 pp: 86-97 A plug-in electrophoresis microchip with PCB electrodes for contactless conductivity detection
Yang M, Huang Z, You H
Royal Society Open Science
2018 vol: 5 (5) pp: 171687 Effect of PWHT on Microstructure, Mechanical and Corrosion Behaviour of Gas Tungsten Arc Welds of IN718 Superalloys
Dilkush Mohammed R, Madhusudhan Reddy G, Srinivasa Rao K
IOP Conference Series: Materials Science and Engineering
2018 vol: 330 (1) pp: 012030 Comparative Studies on Microstructure, Mechanical and Pitting Corrosion of Post Weld Heat Treated IN718 Superalloy GTA and EB Welds
Dilkush Mohammed R, Madhusudhan Reddy G, Srinivasa Rao K
IOP Conference Series: Materials Science and Engineering
2018 vol: 330 (1) pp: 012051 Acceleration of globularization during interrupted compression of a two-phase titanium alloy
Fan X, Zheng H, Zhang Y, Zhang Z, Gao P, et. al.
Materials Science and Engineering: A
2018 vol: 720 pp: 214-224 Aluminum/polypropylene composites produced through injection molding
Li X, Gong N, Yang C, Zeng S, Fu S, et. al.
Journal of Materials Processing Technology
2018 vol: 255 pp: 635-643

Publications 2017

Deformation Mechanism and Hot Workability of Extruded Magnesium Alloy AZ31
Jin Z, Li N, Yan K, Wang J, Bai J, et. al.
Acta Metallurgica Sinica (English Letters)
2017 pp: 1-11 Surface topography induced high injection joining strength of polymer-metal composite and fracture mechanism
Li X, Liu F, Gong N, Yang C, Wang B
Composite Structures
2018 vol: 184 pp: 545-553 Wire bond degradation under thermo- and pure mechanical loading
Pedersen K, Nielsen D, Czerny B, et. al.
Microelectronics Reliability
2017 vol: 76-77 pp: 373-377 On the shear strength of similar diffusion bonded 1Cr11Ni2W2MoV stainless steel hollow structural components: Effect of void morphology
Zhang C, Li M, Li H
Journal of Manufacturing Processes
2017 vol: 29 pp: 10-17 Influence of Cr addition on the interface purification of vacuum brazed NiCr-Cr3C2 coatings on single crystal superalloy
Wang D, Wang W, Chen X, et. al.
Surface and Coatings Technology
2017 vol: 325 pp: 200-209 Burning products of TA15 titanium alloy by friction oxygen concentration method
Sui N, Mi G, Yan M, Cao J, Huang X
Rare Metals
2017 pp: 1-9 Poly(2-oxazoline) block copolymer nanoparticles for curcumin loading and delivery to cancer cells
Raveendran R, Mullen K, Wellard R, Sharma C, Hoogenboom R, et. al.
European Polymer Journal
2017

Publications 2016

Improvement of interlaminar shear strength of 2.5D fabric laminated composites with short-cut web interlayer
Song L, Li J, Zhao Y, Chen X, Chen L
Journal of Polymer Engineering
2016 vol: 0 (0) Effect of vibration frequency on microstructure and performance of high chromium cast iron prepared by lost foam casting
Zou W Zhang Z Yang H Li W
China Foundry
2016 vol: 13 (4) pp: 248-255 The flow behavior and microstructure evolution during (α+β) deformation of β wrought TA15 titanium alloy
Zhao A Yang H Fan X Gao P Zuo R et. al.
Materials & Design
2016 vol: 109 pp: 112-122 The role of dynamic and post dynamic recrystallization on microstructure refinement in primary working of a coarse grained two-phase titanium alloy
Fan X Yang H Gao P Zuo R Lei P et. al.
Journal of Materials Processing Technology
2016 vol: 234 pp: 290-299 Preparation, thermal analysis and mechanical properties of in-situ Al2O3/SiO2(p)/Al composites fabricated by using zircon tailing sand
Wang K Li W Du J Tang P Chen J et. al.
Materials & Design
2016 vol: 99 pp: 303-313 Fourier transform infrared and Raman spectroscopy studies on magnetite/Ag/antibiotic nanocomposites
Ivashchenko, Olena;  Jurga-Stopa, Justyna;  Coy, Emerson;  Peplinska, Barbara;  Pietralik, Zuzanna et al. (2016)
Applied Surface Science vol. 364 p. 400-409 Quantitative analysis of microstructure evolution induced by temperature rise during (α + β) deformation of TA15 titanium alloy
Guo, Liang-Gang;  Zhu, Shuai;  Yang, He;  Fan, Xiao-Guang;  Chen, Fu-Long (2015)
Rare Metals vol. 35 (3) p. 223-229 Effect of particle aspect ratio in magnetorheology
Morillas, Jose R;  Carreón-González, Elizabeth;  Vicente, Juan de (2015)
Smart Materials and Structures    vol. 24 (12) p. 125005 Significant performance enhancement of a UASB reactor by using acyl homoserine lactones to facilitate the long filaments of Methanosaeta harundinacea 6Ac
Li, Lingyan;  Zheng, Mingyue;  Ma, Hailing;  Gong, Shufen;  Ai, Guomin et al. (2015)
Applied microbiology and biotechnology vol. 99 (15) p. 6471-80 Development of non-linear continuous cooling precipitation diagram for Al–Zn–Mg–Cu alloy
Li, H. Y.;  Liu, J. J.;  Yu, W. C.;  Li, D. W. (2014)
Materials Science and Technology Safety issues related to the maintenance operations in a vegetable oil refinery: A case study
Gabriele Landucci, Gianfranco Lovicu, Federica Barontini, Luca Guidi, Cristiano Nicolella (2014)
Journal of Loss Prevention in the Process Industries 30 p. 95-104 Effect of mold temperature on motion behavior of short glass fibers in injection molding process
Xi-Ping Li, Guo-Qun Zhao, Can Yang (2014)
The International Journal of Advanced Manufacturing Technology    Biodegradable chitosan/alginate BSA-gel-capsules for pH-controlled loading and release of doxorubicin and treatment of pulmonary melanoma
Haijun Shen, Hui Shi, Meng Xie, Kun Ma, Bo Li, Song Shen, Xinshi Wang, Yi Jin (2013)
Journal of Materials Chemistry B ß Grain Growth Kinetics of a New Metastable ß Titanium Alloy
Yue Fei, Xin Nan Wang, Zhi Shou Zhu, Jun Li, Guo Qiang Shang, Li Wei Zhu (2013)
Materials Science Forum 747-748 p. 844-849 Microstructure Reconstruct of Continuous Fiber Bundles by Image Analysis
Jin Chao Li, Li Chen, L. Li (2011)
Advanced Materials Research 332-334 p. 1015-1018 Effect of Microstructure on Sliding Wear Behaviour of Modified 9Cr-1Mo steel
Ipsa Tripathy (2011)