インダストリー

産業分野における効率的な検査、最適化されたワークフロー、人間工学に基づく快適性に焦点を当てた詳細な記事やウェビナーをぜひご覧ください。品質管理、材料解析における顕微鏡検査など、幅広いトピックを取り上げています。製造工程の精度と効率を向上させる技術や、最先端技術の活用について、貴重な知見を得ることができます。

Brief Introduction to Glass Knifemaking for Electron and Light Microscope Applications

Glass knives are used in an ultramicrotome to cut ultrathin slices of samples for electron and light microscope applications. For resin and for cryo sections (Tokuyasu samples) the knife edge must be…

Brief Introduction to Coating Technology for Electron Microscopy

Coating of samples is required in the field of electron microscopy to enable or improve the imaging of samples. Creating a conductive layer of metal on the sample inhibits charging, reduces thermal…

Carbon Thickness Evaluation in Electron Microscopy

The coating layers applied and used for electron microscopy imaging are commonly controlled and measured by quartz crystals. These crystals oscillate with a certain frequency (around 6 megahertz when…

Structural details of the C. elegans, head in cross-section. Courtesy of Müller-Reichert T, MPI-CBG, Dresden, Germany, and McDonald K, University of California, Berkeley, USA.

Brief Introduction to High-Pressure Freezing

Water is the most abundant cellular constituent and therefore important for preserving cellular ultra-structure. Currently the only way to fix cellular constituents without introducing significant…

Perusing Alternatives for Automated Staining of TEM Thin Sections

Contrast in transmission electron microscopy (TEM) is mainly produced by electron scattering at the specimen: Structures that strongly scatter electrons are referred to as electron dense and appear as…

Brief Introduction to Critical Point Drying

One of the uses of the Scanning Electron Microscope (SEM) is in the study of surface morphology in biological applications which requires the preservation of the surface details of a specimen. Samples…