Efficiency and flexibility
Ion Beam Milling System Leica EM TIC 3X
Read our latest articles

Cross Section Ion Beam Milling of Battery Components
Sample Preparation of Lithium battery systems requires high quality surface preparation to evaluate their internal structure and morphology. Due to the brittle materials involved, preparing pristine…
Read article

Download EM Workflow Solutions Booklet
This publication is a compilation of appropriate workflows for the most frequently used sample preparation methods, like Correlative Methodologies, Optogenetics & Electro-Physiology, Surface Analysis,…
Read article

Exploring the Structure and Life Cycle of Viruses
The SARS-CoV-2 outbreak started in late December 2019 and has since reached a global pandemic, leading to a worldwide battle against COVID-19. The ever-evolving electron microscopy methods offer a…
Read article

Application Booklet for EM TIC 3X
Today, ion beam milling is one of the most widely-used methods for preparing samples for electron microscopy. Download this 76-pages booklet today and learn how to improve your processes.
Read article

Workflows and Instrumentation for Cryo-electron Microscopy
Cryo-electron microscopy is an increasingly popular modality to study the structures of macromolecular complexes and has enabled numerous new insights in cell biology. In recent years, cryo-electron…
Read article

Introduction to Ion Beam Etching with the EM TIC 3X
In this article you can learn how to optimize the preparation quality of your samples by using the ion beam etching method with the EM TIC 3X ion beam milling machine. A short introduction of the…
Read article

Workflow Solutions for Industrial Research
This brochure presents and explains appropriate workflow solutions for the most frequently required sample preparation methods for material science samples.
Read article

Studying the Microstructure of Natural Polymers in Fine Detail
The potential of cryogenic broad ion beam milling used in combination with scanning electron microscopy (cryo-BIB-SEM) for imaging and analyzing the microstructure of cryogenically stabilized soft…
Read article

Macroscale to Nanoscale Pore Analysis of Shale and Carbonate Rocks
Physical porosity in rocks, like shale and carbonate, has a large effect on the their storage capacity. The pore geometries also affect their permeability. Imaging the visible pore space provides…
Read article

Practical Applications of Broad Ion Beam Milling
Mechanical polishing can be time consuming and frustrating. It can also introduce unwanted artifacts when preparing cross-sectioned samples for electron backscatter diffraction (EBSD) in the scanning…
Read article

Cross Sectioning of Cadmiumsulphide (CdS) for Cathodoluminescence
Cathodoluminescence can be used to achieve spectra and high resolution images of impurity and structural defects in semicondoctors, minerals and insulating materials. This application note explains…
Read article

Cross Sectioning of Copper for Electron Backscattered Diffraction (EBSD)
Application Note for Leica EM TIC 3X - Electron Backscattered Diffraction (EBSD) is a surface technique creating diffraction patterns (Kikuchi-bands). It can be used for crystal orientation mapping,…
Read article

Cross Section of Solar Cells
Application Note for Leica EM TIC020, Leica EM TIC 3X - Cross section of a complete solar cell.
Read article

Cross Sectioning of a Multilayer System - Preparation of a Perfect Sample Surface for EBSD
Application Note for Leica EM TIC 3X - Electron Backscattered Diffraction (EBSD) is a surface technique creating a diffraction pattern (Kikuchi-bands). It can be used for crystal orientation mapping,…
Read article

Cross Sectioning of Ni/Cu on Steel for EBSD
Application Note for Leica EM TIC 3X - Electron Backscattered Diffraction (EBSD) is a surface technique creating a diffraction pattern (Kikuchi-bands). It can be used for crystal orientation mapping,…
Read article

Cross Sectioning of Painted Concrete
Application Note for Leica EM TIC 3X - Ion beam slope cutting is a method that can achieve flat cuts of material combinations consisting of hard and soft materials. Here, cross sectioning of painted…
Read article

Cross Sectioning of a Superconductive Wire
Application Note for Leica EM TIC 3X - Purpose: The shape of the wire is difficult for ion beam slope cutting. Goal: Cross sectional preparation to see the structure of the wire.
Read article

Cross Section of an Aluminium Sample for Electron Backscattered Diffraction (EBSD)
Application Note for Leica EM TIC020, Leica EM TIC 3X - Electron backscattered diffraction (EBSD) is for example used to examine the crystallographic orientation of material. The sample preparation…
Read article

Cross Sectioning of Alumina
Application Note for Leica EM TIC 3X - Alumina is very difficult to handle and almost impossible to prepare with conventional methods. Ion beam slope cutting is a method that can achieve cross…
Read article

Cross Sectioning of CuSn Connector of a Solar Cell
Application Note for Leica EM TIC 3X - Ion beam slope cutting is a method that can achieve flat cross sections of soft materials or material combinations consisting of hard and soft components. The…
Read article

Cross Sectioning of Oil Shale Rock
Application Note for Leica TIC 3X - High quality sample preparation of large area to investigate the sample in the SEM. For the mechanical preparation step diamond lapping foils of 9μm subsequently…
Read article

Cross Sectioning of Rubber (Tire)
Application Note for Leica EM TIC 3X - Ion beam slope cutting is a method that can achieve cross sections of soft materials or material combinations consisting of hard and soft components.
Read article

Cross Sectioning of Basalt Fibres
Application Note for Leica EM TIC 3X - Material Research. Purpose: The fibres are embedded in a soft matrix. That makes it difficult to prepare a cross section. Goal:
Cross section of the basalt…
Read article

Triple-beam Ar-Ion-Milling with a Rotary Stage to Decorate Grain Boundaries and Substructures in Rock Salt
Decoration of grain boundaries in polycrystalline rocks has a long tradition in Structural Geology as in a monomineralic rock the recrystallized grain size is a good indicator for the paleostress…
Read article

Electron Microscopy Sample Preparation: “The Future is Cold, Dynamic and Hybrid”
In 2014, the renowned Electron Microscopy for Materials Science (EMAT) research lab at the University Antwerp, Belgium, and Leica Microsystems started a fruitful collaboration to establish a Leica…
Read article

A Good Place for Materials Scientists and Mineralogists to prepare their EM Samples
In June 2014, the Institut de Minéralogie, de Physique des Matériaux et de Cosmochimie (IMPMC) of the Université Pierre et Marie Curie in Paris became a Leica reference lab for EM Sample Preparation…
Read article

High Quality Sample Preparation for EBSD Analysis by Broad Ion Beam Milling
Electron Backscatter Diffraction technique (EBSD) is known as a
"surface" technique because electron diffraction is generated
within a few tens of nanometers of the sample surface. Therefore,
the…
Read article

Partner Lab for EM Sample Preparation in Paris
At the Institut de Minéralogie, de Physique des Matériaux et de Cosmochimie (IMPMC) of the Université Pierre et Marie Curie in Paris an new lab for EM Sample Preparation welcomes researchers of…
Read article

Analysis of Oil Shale as an Alternative Source of Energy
For some years now, the search for alternative sources of raw materials has concentrated on oil shale deposits. As the exploitation of these raw materials is still extremely complex and expensive,…
Read article

Triple Ion Beam Cutting of Diamond/Al Composites for Interface Characterization
The microstructure of new materials with heterogenic components is extremely difficult to study. As mechanical polishing often not leads to smooth surfaces, a novel ion beam cutting technique has…
Read article

A Word on Cathodoluminescence
Cathodoluminescence microanalysis is an emerging technique that is fast gaining popularity in the world of materials science. CL is a light emission phenomena resulting from the electron beam…
Read article

University of Wollongong Electron Microscopy Centre
The University of Wollongong has a diverse range of materials research programs that includes metallurgy for mining, manufacturing, steel making and transport; polymers for solar cells, energy storage…
Read article
Fields of Application

Sample Preparation for Materials Science
Sample preparation is key for observing the finest textures and details on the sample surface in high resolution. The right workflow and tools for the pre-preparation will lead to an excellently…
Read article

Automotive & Transportation
We at Leica want to be your dependendable collaborators, guiding you to optimal imaging solutions for automotive and transportation, so you can stay ahead of the competition. Our smart imaging…
Read article

Metals & Machine Engineering
Your work in Metals and Machine Engineering requires microscope imaging solutions to help you assemble, inspect, measure, analyze, and document your results while ensuring the highest level of…
Read article

Energy, Mining and Natural Resources
Energizing the worlds infrastructure while maintaining sustainability is always a priority. Leica Microsystems has powerful and customizable microscopy solutions to help you get the most out of your…
Read article

Metallography
You can find out more about Leica microscopy solutions for metallography and metallurgy and how they can empower you to examine precisely microstructure.
Read article